1050 1060 anodized embossed aluminum coil for freezers/refrigerators

2024-04-29 10:13:48
1050 1060 anodized embossed aluminum coil

The most commonly used material for freezer and refrigerator liners is embossed aluminum sheet rolls. Compared with other metal and plastic materials, embossed aluminum coils have good corrosion resistance and thermal conductivity, are better able to adapt to the humid environment inside the refrigerator, provide better moisture-proof and odor-proof capabilities, and are easier to clean. 1050 embossed aluminum coil and 1060 embossed aluminum coil are corrosion-resistant pure aluminum products. After anodization, the corrosion resistance is further improved and it is more wear-resistant. Compared with 3 series aluminum alloy, it has a higher cost performance. , so it is favored by more manufacturers.

Advantage of 1050 1060 anodized embossed aluminum coil for freezers/refrigerators

  • 1. Material advantages

1050 1060 anodized embossed aluminum coil has higher hardness and strength than plastic materials, and has good anti-wear and anti-corrosion properties.

  • 2. Moisture-proof and odor-proof

The surface of the embossed aluminum coil has been processed by high-temperature molding to form a certain concave and convex pattern, which can increase the surface area, facilitate air circulation, and reduce moisture accumulation; at the same time, the aluminum plate material has good anti-corrosion properties and is not easy to rust and produce odor in humid environments. 

  • 3. Clean and easy to care for

The surface of embossed aluminum coils has more obvious concave and convex patterns and is not easy to stain. It only needs to be wiped with ordinary cleaning products. The anodized 1050 embossed aluminum coil and 1060 embossed aluminum coil have improved surface hardness, are not easily scratched and worn, and have a long service life.

  • 4. High cost performance

1050 and 1060 aluminum coils are industrial pure aluminum with relatively low prices. The performance of the aluminum coils is greatly improved after anodizing. Based on the metal’s thermal conductivity, corrosion resistance and production cost, it is extremely cost-effective to choose 1050 1060 anodized embossed aluminum coil for the inner metal plate of the freezer.

 

Specification of 1050 1060 anodized embossed aluminum coil for freezers/refrigerators

Flait Aluminum supplies high quality 1050 1060 anodized embossed aluminum coil for freezers. Commonly used states include H14, H16, etc. The thickness of the aluminum coil is 0.2mm-3.0mm, and the width can be up to 1500mm. Slitting services can be provided according to customer requirements. Specific specifications are as follows:

Alloy 1050,1060
Temper(Base material) H14/H16/H24
Thickness (mm) 0.20-3.00
Width (mm) Max.1500
Length (mm) As per customer’s requirements
Surface Stucco embossed,Anodizing
Pattern  orange peel veins
Embossing thickness ≥10μm
Oxidation thickness ≥3μm
Inner Diameter 505mm
Outer Diameter According to coil weight and finish
Standard ASTM B209,EN573-1
Packaging Export packing: wooden pallets with plastics protection

 

Original Source:https://www.flait-aluminum.com/Stucco-Embossed-Aluminum-Coil-2.html

Tags:stucco embossed aluminum coil,1050 aluminum coil,1060 aluminum coil

CONTACT US TODAY FOR ANY INQUIRY
  • Name:

  • *Email:

  • Mobile / Whatsapp No.:

  • Country:

  • Message:

Home Tel Mail Inquiry