1060 aluminum strip foil is made from pure aluminum alloy, which contains 99.6% aluminum as the primary element. It is typically produced in the “O” temper, which signifies a soft and annealed condition. 1060 aluminum strip foil has high electrical and thermal conductivity, lightweight, flexibility, and formability. 1060 aluminum strip is used for transformer winding in power systems, electrical equipment, and electronics. Flait Aluminum provides various thicknesses and widths, depending on the specific requirements of transformer windings.Click to Order
Alloy | 1050,1060,1070,1350 |
Temper | HO/O |
Thickness | 0.014-2.0 mm |
Width | 20-1350mm |
Conductivity Number (% IACS) | ≥61 |
Resistivity number (Ω·mm² /m) | ≤0.027548 |
Elongation (%) | 20 |
Tensile strength(Mpa) | >60 |
Density in 20°C | 2.7kg/cm3 |
Alloy | Al (%) MIN | Si (%) Max | Fe (%)Max | Cu (%) Max | Mn (%) Max | Zn(%) Max | Mg(%) Max | Ti(%) Max | Other elements (%) |
1050 | 99.50 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 |
1060 | 99.60 | 0.25< | 0.35 | 0.05 | 0.03 | 0.05 | 0.03 | 0.03 | 0.03 |
1070 | 99.70 | 0.25 | 0.04 | 0.03 | 0.04 | 0.04 | 0.03 | – | 0.03 |
1350 | 99.50 | 0.10 | 0.05 | 0.01 | 0.01 | – | – | – | 0.03 |
The 1060 aluminum strip foil is widely used in power transformers for low and medium voltage applications, distribution transformers, reactors and inductors, high-frequency transformers.
Original Source: Transformer Aluminum Strip
Tags: 1060 aluminum foil