8006 aluminum foil fin stock, also known as 8006 hydrophilic aluminum foil, 8006 hydrophilic aluminum fin stock, are mainly used in the production of heat exchanger fins, such as condensers and evaporators of air conditioners, refrigerators, and automobiles. 8006 HO hydrophilic aluminum fin stock can be surface-coated, usually blue and golden. Hydrophilic aluminum foil is a hydrophilic treatment of aluminum foil, through special processing, a layer of hydrophilic layer is coated on its surface. The condensed water will quickly spread out on the hydrophilic aluminum foil and will not condense into water droplets, increase the heat exchange area, speed up the cooling and heating speed, and effectively avoid the noise caused by condensed water blocking the air flow. 8006 HO Golden hydrophilic aluminum fin stock is the main raw material for heat exchangers of household air conditioners, which has an impact on the efficiency of air conditioners. If the raw material of the heat exchanger is hydrophilic aluminum foil, it can increase the cooling efficiency by 5%, and it also has the functions of anti-corrosion and anti-mold, and will not cause the accumulation of water droplets to block the heat exchange. 8006 HO Golden hydrophilic aluminum fin stock has the advantages of good plate shape, good coating performance, high coating adhesion, and good corrosion resistance.
Alloy | 8011/8006/1100/3102/1030B |
Temper | O/F,H22,H24,H26,H18 |
ID | 76MM, 152MM, 300MM, 400MM, 500MM |
OD | 300 – 1250mm |
Sleeve Material | Aluminum, carbon, steel |
Thickness (mm) | 0.08-0.20mm |
Width (mm) | 100~1250mm |
Surface | Blue/Golden/ Bare (Pure) |
Application | Air conditioner condenser, heat exchanger and evaporator etc. |
Payment | 30% deposit + T/T / L/C at sight |
Delivery Period | 35~55 days after receiving the deposit |
Package | Wooden pallets, sea-worthy, with fumigation |
Standard | EN,ASTM,DIN,GB/T-3198 |
Shipment Port | Any port in China |
Alloy | Temper | Mechanical Performance under room temperature |
Tensile Strength (σb, Mpa) | ||
1100/1200 | O | 60-115 |
H22 | 90-135 | |
H24 | 110-160 | |
H26 | 125-180 | |
H18 | ≥140 | |
H19 | ≥150 | |
8011 | O | 60-110 |
H22 | 90-150 | |
H24 | 120-170 | |
H26 | 140-190 | |
H18 | ≥150 | |
H19 | ≥160 | |
3102/1030B | H26 | 125-145 |
8006 | O | 90-140 |
Blue/golden hydrophilic aluminum fin stock coating | ||
No. | Item Index | Technique Index |
1 | Bottom Coating | Epoxy Resin |
Surface Coating | Acrylic Resin | |
2 | Film Thickness | 2.4-2.6µm(Single side average thickness) |
3 | Hydrophilic | Primary Contact angle ≤10° |
Continuous Contact ≤20° | ||
4 | Adherence | Erichsen test (Press Depth 5mm): No peeling |
Gridding test (100/100): No plunger separation | ||
5 | Corrosion resistance | Salt spray test (500hours) |
6 | Alkali resistance | Dipped in 20% NaOH in 20℃ for 3 minutes, absolutely no blister |
7 | Impregnant resistance | Sample’s weight loss≤1% |
8 | Heat resistance | Under 200℃ for 5 minutes, performance and color unchanged |
Under300℃ for 5 minutes, the coating film becomes a little yellow | ||
9 | Oil Proof | Dipped in volatile oil for 24 hours, no blister on the coating film |
10 | Odor of the coating film | No odor |
11 | Abrasion to mould | Same with ordinary aluminum foil |
Original Source: https://www.flait-aluminum.com/Hydrophilic-Aluminum-Foil-For-Air-Conditioner-Heat-Exchanger.html
Tags: 8011 aluminum foil