2017 Aluminum Sheet Plate

The 2017 aluminum plate is the first 2-series alloy to be applied in industry, which has high strength and good machinability, but poor corrosion resistance. The 2 series aluminum plate is characterized by high hardness, among which the copper content is the highest, about 3-5%. The 2 series aluminum plate belongs to aviation aluminum, which is not commonly used in conventional industries at present.

2024 Aluminum Sheet Plate

2024 aluminum plate is a typical hard aluminum alloy in the aluminum-copper-magnesium system. Its composition is relatively reasonable and its comprehensive performance is good.

3A21 Aluminum Sheet Plate

The 3A21 aluminum plate is an Al-Mn alloy, which is a widely used anti-rust aluminum. Its strength is not high and it cannot be strengthened by heat treatment. Therefore, cold working methods are often used to improve its mechanical properties; it has high plasticity in the annealed state. Good plasticity when hardened, low plasticity when cold hardened, good corrosion resistance, good weldability, poor machinability.

3004 Aluminum Sheet Plate

3004 Aluminum plate is an AL-Mn alloy, which is also a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum), and it cannot be strengthened by heat treatment. Therefore, cold working methods are used to improve its mechanical properties: It has high plasticity in the annealed state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, and poor machinability.

High-Precision Ultra-flat aluminum plate

High-precision ultra-flat aluminum plate is an aluminum plate material with high precision and ultra-flat surface.

6061 precision ground aluminum plate

Precision ground 6061 aluminum plate is made from the 6061 aluminum alloy, which consists primarily of aluminum (Al) and magnesium (Mg).

5083 High precision aluminum plate

5083 high precision aluminum plate is a kind of aluminum alloy plate, which is made of 5083 aluminum alloy through precision processing.

8011 Aluminum Sheet Plate

The 8011 aluminum plate is added with Al-Fe-Si elements, and its alloy properties have relatively high advantages in the total alloy elements exceeding 1%. 8011 aluminum alloy material is often used to make aluminum foil, its performance is better than 1 series pure aluminum foil, and it is widely used in aluminum foil.

7050 Aluminum Sheet Plate

7050 aluminum plate is a cold-treated forging alloy with high strength, which is far better than mild steel. The main alloying element of 7050 aluminum plate is zinc, which can be heat treated and strengthened, has good thermal deformation performance, wide quenching range, high strength and good welding performance. 7050 aluminum plate is mainly used for high-stress structures with high strength requirements and strong corrosion resistance, such as mold processing,

7005 Aluminum Sheet Plate

The 7005 aluminum plate is a super duralumin, with good welding performance and can be strengthened by heat treatment. Its strength is not as good as 6061, but it is much lighter. It is a typical lightweight aluminum material. 7005 aluminum plate is often used in welded structures with high strength and high fracture toughness, such as vehicle trusses, rods, containers; large heat exchangers, and parts that cannot be solidified after welding; it can also be used to manufacture sports equipment such as Tennis racket and softball bat.

6101 Aluminum Sheet Plate

6101 aluminum alloy is American wrought aluminum and aluminum alloy. 6101 aluminum plate can be used for high-strength conductive materials. 55% IACS guarantee, good corrosion resistance and weldability, used for processing high-strength bus conductors. 6101 aluminum sheet standards: American Aluminum Association (AA) 6101, USN A96101, ISO R209 E-AlMgSi; China GB 6101; France NF A-GS/L; UK BS 6101A (91E); Germany DIN E-AlMgSi0.5/3.2307.

6005 Aluminum Sheet Plate

6005 aluminum plate belongs to Al-Mg-Si alloy, which has medium strength, good plasticity, corrosion resistance, weldability and formability, and excellent comprehensive performance. 6005 aluminum plate is a kind of anti-rust aluminum widely used. This alloy has a wide range of applications, especially in the construction industry. It is a promising alloy. It cannot be strengthened by heat treatment and can be polished.

5005 Aluminum Sheet Plate

5005 aluminum sheet is an aluminum-magnesium alloy with medium strength and good corrosion resistance. It is widely used in cooking utensils, instrument panels, shells and architectural decorations, interior and exterior materials for building materials, and interior materials for vehicles. When doing anodic oxidation treatment, the anodized film of 5005 alloy is brighter than the oxide film on 3003 alloy, so 5005 aluminum plate is often used in many curtain wall decorations.

5A06 Aluminum Sheet Plate

5A06 aluminum plate is AL-Mg series anti-rust aluminum, 5A06 aluminum plate has high strength, corrosion resistance and stability. The air tightness and weld plasticity of the weld seam welded by argon arc welding are acceptable, and the strength of the welded joints of gas welding and spot welding is 90~95% of the matrix strength, and the machinability is good.

5A05 Aluminum Sheet Plate

The 5A05 aluminum plate is an Al-Mg series anti-rust aluminum alloy, which cannot be strengthened by heat treatment, and the strength can be improved by cold deformation of the alloy. The plasticity in the annealed state is high, and the corrosion resistance of the alloy is good and acceptable. It is suitable for spot welding, atomic hydrogen welding, gas welding, and argon arc welding.

5A03 Aluminum Sheet Plate

The 5A03 aluminum plate is an Al-Mg antirust alloy aluminum plate. Because the magnesium content of the 5A03 aluminum alloy is slightly higher than that of the 5754 aluminum alloy, the corrosion resistance and tensile strength of the 5A03 aluminum plate are higher than that of 5754. The silicon content in the 5A03 alloy is higher than that of 5754. Therefore, the welding performance is higher than that of 5754 aluminum plate, and it can be used for gas welding, argon arc welding, spot welding and seam welding.