Properties of 5083 automotive aluminum sheet plate

5083 aluminum sheet plate is a typical 5 series automotive sheet alloy. It has excellent weldability, corrosion resistance, processing and formability and low temperature performance. Among Al-Mg series alloys, it has medium strength performance, and the strength of the welded joint can be compared with that of annealed  the state of the base material is equal and it has reliable corrosion resistance. The mechanical properties of 5083 automotive aluminum sheet plate increase evenly as the temperature decreases, as does the fracture toughness. It is a good automobile cover alloy, especially suitable for business applications. Vehicles, various special vehicles, semi-trailers and other internal and external welded sheet metal structures. Characteristics of 5083 aluminum alloy  It cannot be strengthened by heat treatment;  In order to prevent “age softening” and stabilize corrosion resistance, semi-finished products need to be stabilized;  In order to prevent the reduction of yield strength during repeated annealing, the final cold deformation should be >50%. Composition of 5083 automotive aluminum sheet plate (mass %) Mg4.0~4.9, Mn0.4~1.0, Cr0.05~0.25, Si0.40, F0.40, Zn0.25, Ti0.15, other impurities individually 0.05 , a total of 0.15, and the rest are Al.  The main phase composition of 5083 automotive aluminum sheet plate is: α (Al), β (Al8Mg5),...

Get A Quote

Mechanical properties of 5052 H32 aluminum sheet plate

5052 aluminum sheet plate has good formability, corrosion resistance, weldability, and medium strength. It is mainly used in the manufacturing of aircraft casings, fuel tanks, engine parts, electrical casings, automobile bodies and other components. Also, 5052 H32 aluminum plate has good plasticity and is often used as a decorative panel or decorative material. 5052 H32 is an aluminum alloy material. 5052 is the grade of aluminum alloy, which means that this material is mainly composed of aluminum; H32 means the hardness state after heat treatment. 5052 aluminum alloy in H32 temper has good tensile strength and corrosion resistance, is easy to weld, form and process. 5052 H32 aluminum sheets plates are available in many specifications, including thin plates and thick plates. What are the characteristics of 5052 H32 aluminum sheet plate? 5052 aluminum plate belongs to AL-Mg-Mn alloy element aluminum plate. 5052 H32 aluminum plate belongs to the main classified product of 5 series Al-Mg alloy aluminum plate. Other products represented by this series are: 5083 aluminum sheet plate, 5754 aluminum sheet plate, 5052 aluminum sheet plate, 5454 aluminum sheet plate, 5182 aluminum sheet plate, etc. 5052 H32 is a common annealing temper among 5052 aluminum plates. Other representative tempers...

Get A Quote

Processing technology of 5052 aluminum plate coil

5052 Aluminum Sheet Plate Coil Grades:O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,               H34,H36,H38,H111,H112,H114,H116,H321. Thickness (mm): 0.15-600 Width (mm): 20-2650 Length (mm): According to the requirements Welcome to contact us for FREE SAMPLES! 5052 aluminum plate coil is a commonly used aluminum alloy material, mainly composed of aluminum, magnesium and other metal elements. Aluminum is the main component of 5052 aluminum alloy, accounting for more than 95%. It is lightweight and has good thermal conductivity. Magnesium is one of the added elements of 5052 aluminum alloy, which can effectively improve the strength and hardness of the alloy while enhancing corrosion resistance. 5052 aluminum plate/coil has good corrosion resistance, weldability, cold workability and medium strength, and is widely used in aerospace, automobile manufacturing, transportation, construction and other fields. Production process of 5052 aluminum plate coil ☆Production process of hot-rolled 5052 aluminum plate Ingredients → smelting → casting → homogenization treatment → casting and cutting → milling → heating → hot rolling → degradation → stretching → sawing of finished products → inspection ☆Microstructure and properties of hot-rolled 5052 aluminum plate 1. The microstructure of 5052 alloy ingot before and after homogenization treatment (460~470℃, 24h). After homogenization, the dendrite network composition has...

Get A Quote

Advantages of aluminum anodized surface treatment

Anodizing is a metal surface oxidation process, and its objects can be aluminum and aluminum alloys, magnesium alloys, titanium and titanium alloys, etc. Among them, the fastest growing and most widely used is the anodizing of aluminum and aluminum alloys. In order to overcome the defects of aluminum alloy surface hardness, wear resistance, etc., expand the scope of application, and extend the service life, surface treatment technology has become an indispensable part of the use of aluminum alloys, and anodizing technology is the most widely used and successful.  The aluminum alloy anodizing pre-treatment process is an important part of determining the appearance quality of the product. For example, 1060 anodized transformer aluminum strip can effectively reduce the risk of transformer short circuit; 5052 anodized aluminum plate is the representative of high-end curtain wall panels; 6061 aluminum forgings can be better for car wheels. The oxide film obtained after anodizing these aluminum alloys can effectively improve the original properties of the aluminum alloy so that it can serve us better. Advantages of Aluminum Anodized Surface Treatment ▶Has higher hardness The hardness of pure aluminum oxide film is higher than that of aluminum alloy oxide film. Generally, its hardness is related to...

Get A Quote

6061-T6 aluminum sheet plate Vs 6061-T651 aluminum sheet plate

6061 aluminum sheet plate belongs to the 6 series aluminum-magnesium-silicon alloy, has high strength, good corrosion resistance, weldability, and oxidation effect. However, due to its complex processing technology and high technical requirements, the price is higher than ordinary aluminum plates. Commonly used tempers of 6061 aluminum sheets plates include O, T4, T6, T651, etc. The T651 temper is formed by stretching on the basis of the T6 temper to eliminate internal stress, making it more suitable for processing and forming; different tempers have different application fields; 6061 aluminum plate is mainly used for automated mechanical parts, precision machining, automobile chassis, molds, etc. 6061-T6 aluminum sheet plate Vs 6061-T651 aluminum sheet plate Alloy 6061-T6 Aluminum sheet plate 6061-T651 Aluminum sheet plate Temper After 6061 aluminum alloy undergoes solution heat treatment, artificial aging is performed. During solution treatment, aluminum alloys are heated to high temperatures and then rapidly cooled to increase hardness. Next, it is heated again to a lower temperature and aged to further enhance the material’s properties. 6061-T6 aluminum sheet has good strength and corrosion resistance. The 6061 aluminum alloy is stretched and balanced based on the T6 state. This process is called Stretching Balance Treatment. Its purpose is to...

Get A Quote

What is 6061 T651 Aluminum?

We know that each aluminum alloy has different alloy states and corresponds to different grades. This is where the diversity of aluminum alloys lies. 6061 T651 aluminum is a commonly used heat treatment state of 6061 aluminum. It represents pre-stretching and artificial aging treatment on the basis of 6061 T6 aluminum, achieving a state in which the internal stress of the aluminum is eliminated. Before that, let’s first understand the basic knowledge of 6061 aluminum plate. 6061 aluminum plate is one of the most versatile heat-treatable aluminum alloys. It has good corrosion resistance, good weldability, good machinability and mild formability. The states of 6061 aluminum alloy include O, H112, T4, T6, T651, etc. 6061 T6 and 6061 T651 are the two most commonly used states. 6061 T6 represents the state that the 6061 aluminum plate reaches after only heat treatment. At this time, the internal stress of the aluminum plate is relatively large and the flatness is average. This is mainly reflected in the deformation of the aluminum plate due to external forces during cutting and processing. By pre-stretching the 6061 T6 aluminum plate, the residual internal stress of the 6061 T6 aluminum plate can be eliminated, which can effectively...

Get A Quote

The difference between transformer copper strip and aluminum strip

Currently, transformers are widely used in various electronic equipment. Transformer copper strips and aluminum strips are two common conductor materials.  There are some obvious differences between copper and aluminum in terms of physical and chemical properties, conductivity, corrosion resistance, strength and hardness, price and sustainability, and environmental protection.  When manufacturing transformers, appropriate materials should be selected according to different needs to ensure their performance and quality. 1. Characteristics of transformer copper strips and aluminum strips Copper and aluminum have different physical and chemical properties. Copper is a heavier metal with a higher density, higher melting point, and better ability to conduct electricity. In comparison, aluminum is lighter, softer, and easier to work with, but it doesn’t conduct electricity as well as copper. 2. Conductive properties of transformer copper strips and aluminum strips There are significant differences in the conductivity of copper strip and aluminum strip. Copper is one of the best conductive materials available and has extremely high conductivity properties, so it is widely used in high-power equipment and electronic equipment. In comparison, although aluminum has a lower conductivity, the price is more affordable. 3. Corrosion resistance of transformer copper strips and aluminum strips Copper and aluminum strips also differ...

Get A Quote

The difference of three tempers of 6061 aluminum sheet plate-F/O/T6

6061 aluminum plate is one of the aluminum plate alloys with a wide range of applications. It has medium strength and is deeply loved by users due to its advantages such as good corrosion resistance, excellent weldability, and good anti-oxidation effect. At present, 6061 aluminum plates are widely used in automobile manufacturing, precision machining, mold manufacturing, automated machinery parts, ship parts and other fields. Commonly used tempers of 6061 aluminum plates include F, O, T, etc. Different applications have different product performance requirements, and the tempers of the aluminum plates used are also different. This article will take you through the differences between the three tempers of 6061 aluminum plates: F, O and T6. Introduction to the three tempers of 6061 aluminum sheet plate F, O and T6 6061 F aluminum sheet plate. F represents the free processing state, which is suitable for special products with work hardening and heat treatment conditions during the molding process. The F-state aluminum plate needs to go through medium-thick plate slicing-sawing-polishing (not polished)-packaging. The production process is very short. There are no specifications for the mechanical properties of the F-state. Customers can heat-treat the F-state according to their own needs to produce the required...

Get A Quote

Anodized Aluminum vs. Pre-painted Aluminum: The Difference

Anodized Aluminum and Pre-painted Aluminum are both commonly used surface treatments for aluminum alloys. Both Anodized Aluminum and Pre-painted Aluminum are widely used in the field of architectural decoration, but there are still some differences between them. The Difference between anodized aluminum and pre-painted aluminum 1. Different processes Anodized aluminum is a method of forming an oxide layer on the surface of aluminum alloy through electrolysis reaction. When current is passed through the electrolyte, the surface of the aluminum alloy will oxidize, forming a hard oxide layer. Pre-painted aluminum is a method of spraying paint onto the metal surface. The sprayed paint will form a protective film after drying on the surface to prevent the aluminum alloy from being oxidized, corroded and worn. Commonly used spray coating materials include PE (Polyester) and PVDF (Polyvinylidene Fluoride). 2.Durability is different The anodized film is formed through a displacement reaction on the metal surface. The hardness and density of the film are relatively high, so it has good durability. The paint has poor durability and is easily peeled off by scratches, chemicals and direct sunlight. Generally speaking, anodized aluminum is more weather-resistant, more scratch-resistant and has a longer service life than pre-painted aluminum....

Get A Quote

Various uses of aluminum strips/tapes

The raw materials of aluminum strips are pure aluminum or aluminum alloy cast-rolled aluminum coils and hot-rolled aluminum coils. They are rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill, and then longitudinally slit into different widths by a slitting machine according to the purpose of aluminum strip. Aluminum tapes are widely used in various industries because of their lightness, strength, and excellent corrosion resistance, electrical conductivity, and thermal conductivity. The specific uses of aluminum strips include: transformer aluminum strips/transformer aluminum foil, aluminum strips for high-frequency welding hollow aluminum strips, aluminum strips for fin radiators, aluminum strips for cables, aluminum strips for stamping, aluminum strips for aluminum edge strips, etc. Commonly used alloy grades of aluminum tapes include 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc. Commonly used tempers include O and H. O represents soft state and H represents hard state. Numbers can be used after O and H to indicate the degree of softness and hardness, as well as the degree of annealing. According to the annealing state of the aluminum strip, the aluminum strip can be divided into fully soft (O/HO), semi-hard (H24), and fully hard (H18). The commonly...

Get A Quote