8011-H14 Aluminum closure sheet plate manufacturer

Stable mechanical properties, low ear making rate, stable below 2%. Good plasticity, can be deep-drawn into 75mm high closures, and there will be no “orange peel” defects after stamping. Better surface quality and uniform fine lines. High thickness accuracy, as low as ±0.005mm.     8011-H14 Aluminum closure sheet plate has high deep drawability, sufficient strength, low ear-making rate, good mechanical properties, is the perfect raw material for bottle cap aluminum plate. The temper h14 of 8011 aluminum closure plate is the most commonly used temper, which refers to the strength and performance in the h14 tempered state after work hardening. Flait Aluminum adopts unique rolling technology, provides aluminum sheets ideal for manufacturing long-neck wine bottles, extremely deep drawing and decorative bottle caps, as well as a range of anti-theft caps for beverage bottles, soft drinks, juices, energy bottles and other products. Usually 8011 aluminum closure sheet plate is used to make ROPP caps, PP caps, anti-theft caps in rolls, anti-theft caps, aluminum bottle caps, aluminum screw caps, tear-off caps, flip caps. In addition, 8011 aluminum sheet is an ideal material for producing PP caps for whiskey and other beverage bottles. The thickness range is 0.16-0.25mm, thickness tolerance is ±0.005mm,...

Get A Quote

3003-H22 Bright finish aluminum diamond tread plate manufacturer

3003-H22 aluminum diamond tread plate is an aluminum plate with diamond pattern on the surface, also called pointer anti-slip aluminum plate/one bar aluminum tread checker plate. 3003 patterned aluminum plate is an aluminum-manganese alloy and is a rust-proof aluminum alloy that is widely used. 3003 aluminum diamond tread plate is usually used where anti-skid is required, such as ramps, stairs, anti-skid floors, and decorative panels. 3003-H22 aluminum diamond tread plate has a bright surface, strong and lightweight, corrosion-resistant and moisture-proof, is ideal for outdoor or indoor use. 3003-H22 diamond pattern aluminum plate has good forming, drilling, welding capabilities, beautiful pattern, anti-slip and provides strong traction. Features of 3003-H22 Bright Finish Aluminum Diamond Tread Plate Anti-skid: 3003-H22 Diamond pattern aluminum plate provides excellent traction and anti-skid properties, is often used for industrial floors, stairs or vehicle treads. Corrosion resistance: The dense and strong Al2O3 protective film is easily formed on the surface of aluminum. The manganese in the 3003-H22 aluminum diamond tread plate enhances its corrosion resistance. No low-temperature brittleness: Aluminum is below 0 degrees Celsius. As the temperature decreases, the strength and plasticity will not decrease, but will increase. Light weight: The density of pure aluminum is about 2700kg/m3, which...

Get A Quote

1060-HO/O Edge deburred aluminum coil strip for transformer winding

Alloy: 1060-O/HO Aluminum strips foils for dry-type transformers Thickness: 0.20mm–3.00mm Width: 20mm-1650mm Coil ID: 150mm, 300mm, 500mm Description: The surface is smooth, without scratches; the edges can be chamfered (rounded corners, rounded edges), without burrs. Resistivity: ≤0.028. Packaging: wooden pallet, export packaging Use: mainly used in electric power, communication industries, mining, underground, and other fields. 1060-HO/O Edge deburred aluminum coil strip for transformer winding is made of high-quality pure aluminum, the aluminum content can reach more than 99.6%. 1060 Aluminum strip and foil is the key raw material for manufacturing transformer windings, has the characteristics of high conductivity, softness, smooth surface and no burrs. Transformer aluminum strip has high requirements on the electrical conductivity, burr curling, side bending, surface quality and other technical indicators of aluminum strips and foils. Transformer aluminum strips are divided into different alloys, specifications, and tempers according to their uses. Alloys include: 1060/1060A, 1050/1050A, 1070/1070A, 1350; Tempers: O/HO; The thickness is between 0.08-3.00. Contact us to get the free samples and latest prices. Flait Aluminum replys on the advantage technical and market advantages of the dry-type transformer raw material industry, starts from the aluminum strip casting process and strictly controls the casting, rolling, heat treatment, finished...

Get A Quote

6 advantages of hydrophilic aluminum foil for air conditioners heat exchanger

Hydrophilic aluminum foil is the main raw material for air conditioning heat exchangers. After ordinary aluminum foil is degreased, washed, and dried, special coatings are coated on both surfaces, after drying and cooling, it becomes a hydrophilic and corrosion-resistant material. It can extend the life of the air conditioner by 5-10 years. Hydrophilic aluminum foil for air conditioners has a good hydrophilic effect, which can make the moisture in the hot air spread easily and flow downward along the sheet, so that the water droplets between the heat exchange plates will not “bridge” and affect the ventilation function of the heat exchanger. Hydrophilic aluminum foil is widely used in household industrial air conditioners, refrigeration cabinets, automobile air conditioners and other refrigeration equipment. The main aluminum foils for air conditioning are: 8006 hydrophilic aluminum foil, 8011 hydrophilic aluminum foil, 3102 hydrophilic aluminum foil, 1100 hydrophilic aluminum foil, etc. 8006 Air conditioning aluminum foil has good plate shape, good coating performance, high coating adhesion, good hydrophilicity and good corrosion resistance. Colors are blue and gold. Click to Order Specification of Hydrophilic Aluminum Foil for Air Conditioners Heat Exchanger 1100 3102 8011 8006 O/OH H22 H24 H26 H18 0.08-0.20 100-1400 ￠75,￠150 ￠200,￠300 ￠505...

Get A Quote

5083 Aluminum Plate for Ship Porthole

5083 aluminum plate for ship porthole is usually on the side of the ship. In order to be suitable for ship portholes in the marine environment, it is necessary to use 5083 aluminum plate with corrosion resistance and good anti-rust function, which can resist corrosion and the harsh environment of the marine climate. Our 5083 aluminum plate can still maintain its strength after welding, has high strength and low ductility fracture performance, and has high corrosion resistance and good anti-rust function. Various sizes of ship windows can be customized to determine the layout of rafters and pens use. 5083 aluminum plates are typically used for larger portholes or those exposed to harsh marine conditions. 6061 aluminum plates are typically used for small and medium-sized portholes or portholes on ships operating in less extreme marine environments. The choice of aluminum alloy for portholes can depend on a variety of factors including porthole size, marine environment and the specific requirements of the ship. Welcome to contact us to order. Click to Order Specification of 5083 Aluminum Plate for Ship Porthole Alloy 5083 Temper O,H111,H112,H116,H24,H32,H321 Thickness (mm) 1.50-120 Width (mm) ≤3100 Length (mm) 1000-16000 Certificate DNVGL,ABS,LR,CCS Surface treatment Anodizing, spraying or other surface...

Get A Quote

5086 Medium Thick Aluminum Plate for Ship Bottom Shell

5086 Medium thick aluminum plate belongs to the aluminum-magnesium alloy and is a kind of rust-proof aluminum. Due to the complexity and variability of the marine environment, countermeasures need to be taken in ship design to improve ship performance and safety. The 5086 Medium thick aluminum plate produced by FLAIT ALUMINUM has high corrosion resistance, good weldability and medium strength. Therefore suitable for use as bilge hull. 5086 Medium thick aluminum plate for ship bottom shell can protect the ship from corrosion, reduce the weight of the hull, thereby reducing the single engine capacity, increasing speed, reducing fuel consumption, and saving fuel. Click to Order Specification of 5086 Medium Thick Aluminum Plate for Ship Bottom Shell Alloy 5086 Temper O,H111,H112,H116,H321 Thickness (mm) 1.50-120 Width (mm) ≤3100 Length (mm) 1000-16000 Package Export packaging (protective film, interleaved paper) Certificate CCS, DNV, ABS, BV Chemical Composition Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr AL 5086 0.40 0.50 0.10 0.20-0.70 3.50-4.50 0.05-0.25 – 0.25 0.15 – Remainder Mechanical Properties Alloy Temper Tensile strength Rm(Mpa) Yield strength Rp0.2(MPa) Elongation A(%) 5086 O/H111 204-305 ≥95 ≥16 H112 ≥250 ≥125 ≥8 H116 ≥275 ≥195 ≥10   Features of 5086 Medium Thick Aluminum Plate for...

Get A Quote

1060 Aluminum Foil for Battery

The aluminum content of 1060 aluminum foil is as high as 99.6%, which can maintain good electrical conductivity and chemical stability of the battery. The thickness and size accuracy of 1060 Aluminum foil for battery directly affect the performance and stability of the battery. FLAI ALUMINUM welcomes customers to order 1060 aluminum foil in precise thickness, width and length. 1060 O aluminum foil is suitable for manufacturing flexible battery packaging materials or battery casings that require certain bending properties. 1060 H14 aluminum foil is commonly used in battery case materials that require a certain degree of hardness and strength, providing appropriate tensile resistance and corrosion resistance. 1060 H18 aluminum foil is suitable for battery casing materials that require higher hardness and strength. It can provide better tensile resistance and hardness, and is especially suitable for applications with particularly strict requirements on battery casings. Specification of 1060 Aluminum Foil for Battery Alloy 1060 Temper O, H14, H18 Thickness (mm) 0.016-0.2 Width (mm) 100-1600 Length (mm) C Surface Mill finish ID 76mm,152mm,408mm,508mm or customized Standard ASTM-B-209M,BS EN 485-2,BS EN 573-3,GB/T3880-2008 Certificate Mill Test Certificate, Certificate of origin: Form A, Form E, CO Package Export standard, Eye to sky or eye to wall...

Get A Quote

5052 H32 aluminum sheet for auto body panels

At present, lightweighting has become a major trend in the development of the automobile industry, which is of great significance for both energy consumption and automobile performance optimization. Aluminum alloy is the first choice material for automobile lightweighting due to its outstanding comprehensive cost performance. Aluminum alloy is widely used in automobile manufacturing, such as body, four-door and two-door cover, seat frame, automobile interior, automobile fuel tank, wheel hub, etc. Aluminum alloy can be used. The body panel is generally made of 5052 H32 aluminum sheet. 5052 H32 aluminum sheet is an AL-Mg series alloy and is well known as a widely used anti-rust aluminum. It is an excellent general-purpose alloy with good formability, corrosion resistance, weldability and moderate strength. It combines the advantages of 3 series anti-rust aluminum sheets and the excellent formability of 5 series alloys. Due to the addition of a small amount of chromium and manganese, the aluminum sheet’s ability to resist stress corrosion cracking is improved, making it very suitable for use as automobile body panels. 5052 h32 is a commonly used annealing process. The annealing temperature is generally between 420 ℃ and 475 ℃ for direct annealing, so that the aluminum sheet has the...

Get A Quote

3003 H24 aluminum sheet for roofing

3003 aluminum plate is a very widely used AL-Mn aluminum alloy and is a common rust-proof aluminum plate. It has good rust and corrosion resistance and is suitable for applications in outdoor environments; it also has excellent formability and weldability, and is easy to bend and harden. People often use 3003 aluminum sheets in buildings, such as curtain walls, roof panels, folding panels, soundproof ceilings, rain gutters, etc. Roofs have special requirements for substrates and coatings. Roof panels are required to have high wind pressure resistance and good bending properties. At present, AL-Mn-Mg alloy is commonly used in the market,which is the 3000 series aluminum alloy. Because the 3000 series aluminum alloy has good tensile strength, which is 1.5-2 times higher than ordinary 1100 alloy aluminum plates, and has good ductility, it is conducive to subsequent processing and forming of various shapes. Aluminum roof panels commonly use 3003 H24 aluminum alloy, which has higher strength than 1000 series aluminum plates. The tensile capacity of 3003 H24 is generally 160-170mpa, which is about 20% higher than 1060 and 1100 aluminum plate series. At the same time, 3003 aluminum plate coils can be used on the surface of raw aluminum Roll on...

Get A Quote

3003 aluminum coil for building insulation

3003 aluminum coil is a representative product of 3 series aluminum-manganese alloy, also known as anti-rust aluminum coil and thermal insulation aluminum coil. It has low density, light weight and beautiful appearance; aluminum is not easily oxidized in the air and has a longer service life than other materials. It is mainly used in pipes, building roofs and walls as insulation materials. Metal building insulation membranes play a very important role in the construction industry. Compared with traditional insulation materials, building insulation aluminum panels are not easy to loosen, avoiding the risk of falling off, and can be tightly bonded with external building decoration materials. Coatings also protect buildings from erosion and corrosion from the natural environment. As a new type of thermal insulation material, 3003 aluminum coil is often used as metal building insulation. Due to the presence of manganese element, this material has excellent anti-rust and anti-corrosion properties, and its corrosion resistance is stronger than Series 1 pure aluminum, such as water, atmosphere, gasoline, inorganic salts, food, etc. Not only that, they are also resistant to acrylic corrosion and are suitable for a variety of special environments. At the same time, 3003 aluminum coils can be color-coated with...

Get A Quote