1050 1060 Aluminum sheet :PS/CTP Aluminum Substrate Sheet

PS and CTP aluminum plates are processed by hot rolling and cold rolling, and the surface is coated with photosensitive resin after special treatment. They are important materials in the modern printing industry and are widely used in various offset printing plates. At present, the main aluminum substrates used for PS/CTP plates are 1050 aluminum plates, 1060 aluminum plates, and 1070 aluminum plates. They have become an undisputed PS/CTP plate substrate due to their low density, high strength, good forming, good hydrophilicity, high stability, and good surface treatment. PS plate base aluminum plate: mainly used for traditional photosensitive printing plates, usually 1050 aluminum plate, 1060 aluminum plate and 1070 aluminum plate. These aluminum alloys have high purity (aluminum content ≥99.50%, ≥99.60% and ≥99.70% respectively), ensuring excellent printing quality and durability. CTP plate base aluminum plate: used for computer direct platemaking technology, requiring higher surface quality and physical properties to adapt to modern high-speed printing equipment. CTP plates also usually use 1050 aluminum plates or 1060 aluminum plates, but the thickness is slightly different, usually 0.28mm, which is slightly thicker than the PS plate base to improve rigidity and stability. Specifications of PS/CTP Aluminum Substrate Sheet ◆ Alloy: 1050, 1060 ◆...

Get A Quote

3003 aluminum sheet and coil for heat exchangers radiators

Radiators are key components widely used in many fields, which ensure the normal operation of equipment and systems. 3003 aluminum sheet/coil is mainly composed of aluminum, manganese and a small amount of silicon alloy material. Aluminum itself is a light and soft metal with good electrical and thermal conductivity, while the addition of manganese and silicon enhances the mechanical properties and corrosion resistance of aluminum. The superior mechanical properties, corrosion resistance and heat dissipation performance of 3003 aluminum coil give it a unique advantage in the production of radiator accessories. The good ductility of 3003 aluminum coil allows aluminum coil to be easily processed into various shapes and sizes to meet the diverse needs of radiator stamping accessories. After the surface of 3003 aluminum alloy is treated, the oxide film formed on its surface has good corrosion resistance, which can effectively resist the erosion of the atmosphere, water and some chemicals, ensuring that the radiator accessories can maintain their performance and appearance for a long time during use. 3003 aluminum sheet and coil is a general aluminum alloy material with good strength and corrosion resistance, and has demonstrated its wide applicability in many fields. It is commonly used to manufacture...

Get A Quote

1050 H24 Aluminum Sheet for Ventilation Ducts

“1050”refers to aluminum alloy, is a commercially pure aluminum with excellent corrosion resistance and machinability. “H24” refers to the tempered state of aluminum. In this case, it indicates that the aluminum has been strain hardened and partially annealed, with moderate strength and good formability. 1050 H24 aluminum sheet is widely used in ventilation ducts due to its anti-corrosion properties, light weight, and simplified manufacturing process. Its adaptability to duct conditions and compatibility with HVAC systems make it a top choice. Ventilation ducts are widely used and are found almost everywhere, from offices to public buildings. These ventilation systems are routine installations, and the market tends to favor aluminum alloy sheets as their structural materials, especially 1050 h24 aluminum sheets, because of its superior performance. Specifications of 1050 H24 aluminum sheet for ventilation ducts Alloy: 1050 Thickness: 0.1-500mm Width: 20-2650mm Length: 500-16000mm Material state: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114 Typical products: PS board base, signboard, heat sink, stamping parts, lamps, battery soft connection, ventilation ducts, etc. Advantages of 1050 H24 aluminum sheet for ventilation ducts High plasticity and corrosion resistance 1050 H24 aluminum alloy plates have high plasticity and can be processed...

Get A Quote

Transformer Aluminum Strip and Foil

Transformer aluminum strip and foil is also called aluminum strip and foil for transformers, which is mainly used for winding of dry and oil-immersed transformers. Commonly used transformer aluminum strip and foil include: 1060 aluminum strip, 1050 aluminum strip, 1070 aluminum strip, 1350 aluminum strip. The thickness range is 0.2mm to 3.0mm, and the width range is 30mm to 1600mm. Aluminum foil and strip for transformers has high conductivity, good corrosion resistance and beautiful appearance. It is usually used as a supporting material to form transformer windings, which can reduce transformer losses and improve transformer performance. Transformer aluminum strips are mainly used in large transformers, solar energy, and power industries.   Specifications of Transformer Aluminum Strip and Foil Product Name 1050 1060 1070 1350 Transformer Aluminum Strip and Foil Tempers O/HO Thickness 0.2-3.0mm Width 30-1600mm Quantity Tolerance ±10% ID 152, 200, 300, 400, 500mm Surface Treatment Mill finish Application Transformer windings Packaging Wooden pallet Payment TT, 30% deposit, 70% balance before shipment, OR 100% L/C at sight Delivery 20-25 days MOQ. 5-8 TON Port Qingdao/Shanghai Sample Free samples are available for reference Note Can customize production   Advantages of Transformer Aluminum Strip and Foil ◆ No burrs ◆ Rounded edges ◆ Good...

Get A Quote

8011 aluminum foil for airline food contaienr

Aluminum foil is a safe, hygienic and environmentally friendly material, often used as packaging materials and food containers. Aviation aluminum foil boxes are generally made of 8011 or 3003 aluminum foil through punching and die stamping. The 8011 aluminum foil is produced by hot rolling process, and there are no wrinkles when stamping. It is often used as the base material of aviation wrinkle-free lunch boxes. 8011 aviation aluminum foil lunch boxes mostly use coated aluminum foil, and the thickness is generally 0.08-0.09mm. The coating material is a food-grade resin coating. The transparent or white coating is attached to the aluminum foil through high-temperature coating to isolate the aluminum foil from the air and avoid oxidation and blackening of the aluminum foil. The food container made of this kind of aluminum foil is not only beautiful, but also has a certain hardness. The product price is moderate, disposable, safe and hygienic. Specification of 8011 aluminum foil for airline food contaienr ◆ Alloy:8011 aluminum foil ◆ Temper:O,H14,H16 ◆ Thickness:0.006-0.20mm ◆ Width:100-1600mm ◆ Length:C ◆ Uses: Airline food contaienr,medicine foil, tape foil, cable foil, lunch box material, food foil, air conditioner aluminum foil Features of 8011 aluminum foil for airline food contaienr...

Get A Quote

The difference between 3003 and 3004 aluminum foil for container

3003 aluminum foil and 3004 aluminum foil both belong to the aluminum-manganese alloy series and have good rust resistance and corrosion resistance. Because aluminum foil products are safe and non-toxic, can meet hygiene and safety standards, and are very suitable for food packaging and container manufacturing, both are widely used in lunch boxes, fast food takeout, food packaging and other fields. However, there are also some differences between the two.  This article will show the differences between 3003 container foil and 3004 container foil from the following aspects. Differences between 3003 and 3004 aluminum foil for container 1. Chemical composition Composition 3003 Aluminum Foil 3004 Aluminum Foil Al Remaining (96.7%-99.0%) Remaining (more than 98%) Mn 1.0% – 1.5% 1.0% – 1.5% Fe Max.0.7% Max.0.7% Si Max.0.3% 0.30% Cu Max.0.1% Max.0.25% Mg Max.0.1% 0.8% – 1.3% Zn Max.0.1% Max.0.25%   2. Physical properties 3003 aluminum foil has better plasticity and forming properties, but its strength is lower than that of 3004 aluminum foil; 3004 aluminum foil has higher strength but lower elongation. Item 3003 3004 Tensile strength (MPa) 142-178 150-285 Plasticity better good Melting point Lower Higher Coefficient of thermal expansion Higher Lower   3. Application Scope 3004 aluminum foil belongs to...

Get A Quote

1070 O Aluminum Sheet Supplier

1070 aluminum sheet is a high aluminum alloy material with an aluminum content of more than 99.7%, so it is also called pure aluminum sheet. 1070 aluminum sheet is not only relatively cheap, but also has a high recycling value, making it an economical and practical material choice. FLAIT ALUMINUM is a professional aluminum product manufacturer that produces and supplies 1070 aluminum sheets of different tempers and specifications. Our production process includes strict quality control to ensure that its performance meets international standards. Delivery status of 1070 aluminum sheet ◎1070 O aluminum sheet: the unheat-treated state of 1070 aluminum alloy. The material in the O state has high plasticity and machinability, but relatively low strength. ◎1070 H12/H14/H16/H18 aluminum sheet: These states represent 1070 aluminum alloys after different degrees of semi-hardening treatment. The H12 state is the state after a certain degree of cold working, with a certain hardness and strength. The H14 state is harder than the H12 state, while the H16 and H18 states have higher hardness and strength. Performance of 1070 O aluminum sheet ◆ High plasticity: easy to perform various pressure processing and stretching and bending. ◆ Corrosion resistance: has good corrosion resistance. ◆ Good electrical conductivity...

Get A Quote

6061 aluminum plate for bicycle frames and handlebars

Bicycles are a very common and environmentally friendly means of transportation in our daily lives. As people’s demand for them continues to increase, the styles and materials used are constantly being optimized and updated. Bicycles have gradually evolved from wooden frames to steel frames, and now aluminum alloys and other materials have been used in bicycle manufacturing. Aluminum alloys are widely used in bicycles, and different alloys are used for different parts. Among them, the frame, handlebars, steering rods, uprights, hubs, gear cranks, brakes, etc. can all use 6061 aluminum plates, while the bells use 5052 aluminum alloys, 5086 aluminum alloys, and 2024 aluminum alloys. The common temper of 6061 aluminum plate are T4, T5, and T6. The T temper is a heat-treated state. 6061 aluminum plate has the characteristics of high corrosion resistance, high toughness, not easy to deform during processing, easy to polish, color and oxidize. After heat treatment, the application performance and strength of 6061 aluminum plate in the bicycle field are getting better and better. It is both beautiful and anti-corrosive, ensuring the long-term beauty and durability of bicycles. 6061 aluminum plate is used in bicycle frames and handlebars, which can greatly reduce the weight of...

Get A Quote

8021 Battery Soft Pack Aluminum Foil

Soft-pack batteries are another name for polymer batteries. Compared with lithium-ion batteries, they have many advantages such as small size, light weight, high specific energy, high safety, and flexible design. Soft-pack batteries are packaged in aluminum-plastic film, and their structure is usually three-layer, with the middle layer being aluminum foil material. 8021 battery soft-pack aluminum foil is a high-performance aluminum foil, mainly used for soft-pack aluminum-plastic film of lithium batteries. Advantages of 8021 battery soft pack aluminum foil 8021 aluminum foil has excellent performance. As the substrate of lithium battery soft-pack aluminum-plastic film, it has the following advantages: Excellent moisture resistance and barrier properties 8021 aluminum foil has extremely high barrier properties, which can effectively prevent water vapor penetration, ensuring that the electrolyte inside the battery is not polluted by the external environment, and also preventing the leakage of gas inside the battery, enhancing the stability and safety of the battery. Good heat sealing performance During the manufacturing process of the battery, the aluminum-plastic film needs to be sealed by a heat sealing process to seal the battery cell. During heat sealing, the inner layer of the aluminum foil and the outer plastic film melt under high temperature and pressure...

Get A Quote

Conductive aluminum busbar 1060 1070

Closed bus duct (referred to as bus duct) is a busbar system composed of metal plates (steel plates or aluminum plates) as protective shells, conductive bars, insulating materials and related accessories. The main features of aluminum plates for aluminum alloy bus ducts are corrosion resistance, light weight and high strength. Aluminum alloy bus ducts are mostly processed and produced with pure aluminum plates. The main alloy grades are 1060 aluminum plates and 1070 aluminum plates, and the common thickness ranges from 10-400mm. The common sizes of conductive aluminum bars 1060 are: 80 x 10mm, 70 x 3mm. 1060 busbar aluminum plates have high electrical conductivity, good thermal conductivity and high corrosion resistance. It is relatively easy to weld, and can be gas welded, hydrogen atom welded and contact welded, but brazing is not easy. 1060 aluminum plates have good ductility and tensile strength, and can meet the requirements of stretching and stamping in conventional production. Advantages of conductive aluminum busbar 1060 1070 Excellent conductivity 1060 aluminum plate has excellent conductivity, and its conductivity is as high as 60% or more, which can effectively reduce the resistance of the bus duct and reduce the loss during power transmission. Good corrosion resistance...

Get A Quote