3003 Stucco Embossed Aluminum Coil For Refrigerator Insulation

3003 stucco embossed aluminum coil is indeed a commonly used material for refrigerator insulation purposes.When used for refrigerator insulation, the 3003 stucco embossed aluminum coil is often applied as a lining or cladding material inside the refrigerator walls and doors. It helps to provide thermal insulation and protection to the internal components, contributing to the overall efficiency and performance of the refrigerator. Specifications of 3003 Stucco Embossed Aluminum Coil For Refrigerator Insulation Alloy 3003 Stucco Embossed Aluminum Coil Temper O, H12, H14, H22, H24 Thickness(mm) 0.2–2.0 Width(mm) 100-1300 Inner Diameter(mm) 150mm, 300mm, 500mm Length(mm) As per customer’s requirements Surface Treatment Mill Finish,bright finish,anodized,color coated Standard GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements.   Alloy Si Fe Cu Mn Mg Cr Zn Ni Ti Others Al Simple Total 3003 0.6 0.7 0.05-0.20 1.0–1.5 – – 0.1 – – 0.05 0.15 Remain   Advantages of 3003 Stucco Embossed Aluminum Coil For Refrigerator Insulation Thermal Insulation: Aluminum is an excellent thermal conductor, and the embossed stucco pattern increases the surface area, which helps to improve heat transfer resistance and thermal insulation. This property is beneficial for maintaining a stable temperature inside the refrigerator. Corrosion Resistance: 3003 aluminum alloy...

Get A Quote

7075 medium thick aluminum plate for aircraft landing gear

7075 medium-thick aluminum plate for aircraft landing gear to manufacture structurally demanding components such as support structures, connectors, joists, outriggers and other critical components. Its high strength and rigidity enable the chassis to withstand high loads and shock loads while maintaining structural stability and reliability. Specification of 7075 medium-thick aluminum plate for aircraft landing gear Alloy 7075 Temper T651 Thickness (mm) 6 – 100 Width (mm) C Length (mm) C Chemical Composition Al (%) Zn (%) Mg (%) Cu (%) Mn (%) Cr (%) Fe,Si,Ti 90 5.6-6.19 2.1-2.9 1.2-2.0 0.3 0.18-0.28 microscale Mechanical Properties Alloy Yield strength Rp0.2(MPa) Tensile strength Rm(Mpa) Elongation A(%) Hardness(HB) 7075 300-500 500-600 5-12 150-190   Features of 7075 medium-thick aluminum plate for aircraft landing gear High strength: 7075 alloy has high strength, stronger than ordinary steel, and its tensile strength can reach 560 MPa. Lightweight: Compared with other conventional metal materials, 7075 alloy has a lower density, which makes the landing gear have better lightweight performance. Excellent corrosion resistance: 7075 alloy has good corrosion resistance and can resist the erosion of some corrosive media. Good machinability: 7075 alloy has good plasticity and machinability, which is convenient for processing operations such as stamping, cutting and welding....

Get A Quote

7050 medium thick aluminum plate for body of the plane

7050 medium thick aluminum plate for body of the plane as it helps to reduce the overall weight of the plane. This in turn improves fuel efficiency and increases the aircraft’s payload capacity. Medium-thick aluminum plate has an excellent strength-to-weight ratio. They have sufficient tensile strength and withstand compressive forces, ensuring the structural integrity of the aircraft. Aircraft are constantly exposed to harsh environmental conditions, including humidity, temperature fluctuations and exposure to chemicals or salt water. Aluminum’s corrosion-resistant properties help protect the airframe from degradation and extend its lifespan. Aluminum sheets are highly malleable and can be easily fabricated and formed into the complex structures required for aircraft fuselages. It can be easily formed, welded and joined, making it a versatile material for making aircraft components. Specification of 7050 Medium Thick Aluminum Plate for Body of The Plane Alloy 7050 Temper T6,T651,T74 Thickness (mm) 10-150 Width (mm) 1000-3000 Length (mm) C Chemical Composition Al (%) Zn (%) Cu (%) Mn (%) Cr (%) Si (%) Mg (%) Fe,Ti,Ni 90-92.5 5.7-6.7 2.0-2.6 0.08-0.15 0.04-0.12 0.10-0.15 1.9-2.6 microscale Mechanical Properties Alloy Yield strength Rp0.2(MPa) Tensile strength Rm(Mpa) Elongation A(%) Hardness(HB) 7050 455-503 524-550 2-8 140-160   Features of 7050 Medium Thick Aluminum...

Get A Quote

6063 medium thick aluminum plate for car body

6063 aluminum alloy is suitable for the manufacture of automobile bodies and other auto parts. It has high strength, good weldability and corrosion resistance. Due to its light weight, the use of 6063 aluminum alloy for the body can reduce the weight of the vehicle and improve fuel efficiency. In addition, 6063 aluminum alloy has good surface treatment performance, and can be easily anodized and other surface treatments to meet the appearance requirements of automobiles. Specification of 6063 Medium Thick Aluminum Plate for Car Body Alloy 6063 Temper O,T4,T6 Thickness (mm) 0.5 – 150 Width (mm) 100 – 2600 Length (mm) C Chemical Composition Al (%) Si (%) Cu (%) Mg (%) Fe (%) Mn (%) Cr (%) Zn (%) 98.1-98.9 0.20-0.6 0.10 0.45-0.9 0.35 0.10 0.10 0.10 Mechanical Properties Alloy Yield strength Rp0.2(MPa) Tensile strength Rm(Mpa) Elongation A(%) Hardness (HB) 6063 110-240 130-230 8-20 35-95   Features of 6063 Medium Thick Aluminum Plate for Car Body 6063 medium thick aluminum plate has low density and is lighter than steel, which can reduce the weight of the vehicle and improve fuel efficiency. 6063 medium thick aluminum plate has good tensile strength and corrosion resistance, suitable for bearing the load of the body...

Get A Quote

1060 embossed aluminum coil for pipe insulation

The 1060 embossed aluminum sheet coil is a popular choice for pipe insulation due to its excellent thermal insulation properties. The embossed pattern on the surface of the coil enhances its durability and anti-slip characteristics, making it ideal for applications in industrial settings. The 1060 aluminum alloy is known for its high corrosion resistance and conductivity, which makes it suitable for insulating pipes carrying fluids or gases at different temperatures. It helps to maintain the desired temperature within the pipes, preventing heat loss or gain. Additionally, the embossed surface of the coil improves the mechanical strength of the insulation and aids in easy installation. The pattern further enhances the aesthetics of the pipe insulation, making it an appealing choice. Specifications of 1060 embossed aluminum sheet coil for pipe insulation   Alloy 1060 embossed aluminum sheet coil  Temper O, H12, H14, H22, H24 Thickness(mm) 0.2–3 Width(mm) 1000-1500 Length(mm) As per customer’s requirements Surface Treatment Mill Finish,bright finish,anodized,color coated Standard GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements.   Alloy Si Fe Cu Mn Mg Zn Al 1060 0.25 0.35 0.05 0.03 0.03 0.05 99.6   Advantages of 1060 embossed aluminum sheet coil for pipe insulation   The size of the...

Get A Quote

5754 aluminum sheet plate for tank truck body

5754 aluminum plate is one of the superior products of Flait Aluminum, 5754 aluminum plate belongs to AL-MG, the magnesium content is about 3%, usually called “AlMg3”. The 5754 aluminum plate has the characteristics of corrosion resistance, excellent processing performance, and easy processing and forming. The 5754 aluminum sheet produced by Flait Aluminum far exceeds the national standard, and the quality is more trustworthy. The 5754 aluminum sheet plate in different heat treatment tempers is the main material used in the automobile manufacturing industry (car doors, molds, seals) and the production of tank cars. It has good anti-rust and corrosion resistance, excellent processing performance, excellent corrosion resistance, high fatigue strength, high weldability and medium static strength, and there is no color difference on the anodized surface. The commonly used tempers of 5754 aluminum plate are 5754-H111 and 5754-H22, H12, H14, H114, etc. In the fully softened annealed state, it has good formability and can be work hardened to high strength levels. Specification of 5754 aluminum sheet plate for tank truck body   Alloy Temper Thickness (mm) Width(mm) Length(mm) 5754 O, H111, H112, H114, H116, H32, etc. 4 – 8 1500 – 3450 500 – 16000 Standards GB/T 3880, EN14286, EN485, ASTM B209, or...

Get A Quote

Blue/golden hydrophilic aluminum fin stock

Hydrophilic aluminum fin stock, also known as aluminum foil fins, hydrophilic aluminum foil, are mainly used in the production of heat exchanger fins, such as air-conditioning condensers and evaporators, refrigerator frost-free evaporators/finned evaporators, commercial refrigerator condensers and evaporators, automotive air-conditioning condensers and evaporators, etc. Hydrophilic aluminum foil can be surface-coated, usually blue and gold. Flait Aluminum provides hydrophilic aluminum foil for air conditioner are: 8006, 8011, 3102, 1100, 1030B, etc. Specification of blue/golden hydrophilic aluminum fin stock   Alloy 8011/8006/1100/3102/1030B Temper O/F,H22,H24,H26,H18 ID 76MM, 152MM, 300MM, 400MM, 500MM OD 300 – 1250mm Sleeve Material Aluminum, carbon, steel Thickness (mm) 0.08-0.20mm Width (mm) 100~1250mm Surface Blue/Golden/ Bare (Pure) Application Air conditioner condenser, heat exchanger and evaporator etc. Payment 30% deposit + T/T / L/C at sight Delivery Period 35~55 days after receiving the deposit Package Wooden pallets, sea-worthy, with fumigation Standard EN,ASTM,DIN,GB/T-3198 Shipment Port Any port in China   Chemical composition of blue/golden hydrophilic aluminum fin stock No. Alloy Si Fe Cu Mn Mg Cr Zn Ti OTHERS Al SINGLE TOTAL 1 1100 Si+Fe:0.95 0.05-0.20 0.05 – – 0.1 – 0.05 0.15 99 2 3102/1030B 0.2 0.3 0.1 0.3 0.05 0.05 0.1 0.08 0.2 Balance 3 8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.05 0.1 0.08 0.05 0.15...

Get A Quote

What is the difference between aluminum strip foil and copper foil strip for transformer winding?

Aluminum foil strips for transformers, also called aluminum transformer strips foils, are mainly used for dry and oil-immersed transformer windings, and the main aluminum transformer strip alloys are 1050, 1060, 1070, 1350. Aluminum foil strips for transformers have high conductivity, good corrosion resistance and beautiful appearance, are essential materials in the process of producing transformers. The thickness of aluminum foil strips for transformers ranges from 0.2mm to 3.5mm and the width ranges from 10mm to 1600mm. The alloys of copper strips foils for transformers are mainly C1100, C11000, T2. There is a big difference between aluminum strips and copper strips for transformers, depending on how they are used in transformers. The difference between aluminum strip foil and copper foil strip for transformer winding   1.Chemical composition between transformer aluminum foilstrip and copper foilstrip Chemical composition of aluminum foil strip for transformer Alloy Al (%) MIN Si (%) Max Fe (%) Max Cu (%) Max Mn (%) Max Zn (%) Max Mg (%) Max Ti (%) Max Other elements (%) 1050 99.50 0.25 0.40 0.05 0.05 0.05 0.05 0.03 0.03 1060 99.60 0.25 0.35 0.05 0.03 0.05 0.03 0.03 0.03 1070 99.70 0.25 0.04 0.03 0.04 0.04 0.03 – 0.03 1350 99.50 0.10 0.05 0.01 0.01 – – – 0.03  ...

Get A Quote

5083 5052 5086 Marine grade aluminum tread checker plate sheet

Aluminum tread checker plate sheet is also called embossed aluminum plate, patterned aluminum plate. Aluminum checker plate is made by external mechanical processing of aluminum plate. 5083 5052 5086 Aluminum tread plates belong to aluminum-magnesium alloy, the magnesium content is between 3-5%, it has good corrosion resistance, hardness and anti-rust performance. The texture of the aluminum tread plate is clear, decorative, and has a strong anti-skid function. It is widely used in stairs, workshops, subways, cold storage, car floors and other places. 5083 marine grade non-slip aluminum checker plate 5083 aluminum plate has a beautiful surface after anodizing. Arc welding performance is good. The main alloying element in 5083 aluminum alloy is magnesium, which has good corrosion resistance and weldability, as well as medium strength. Excellent corrosion resistance makes 5083 alloy widely used in marine applications such as ships, as well as automobiles, subway light rails, and tank cars. 5052 marine grade non-slip aluminum checker plate 5052 aluminum plate AL-Mg series alloy is a widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance,...

Get A Quote

5154 aluminum plate for ship bottom plate

5154 aluminum plate for ship bottom plate can withstand corrosion in seawater and humid environments. This allows the bottom plate to be used in harsh marine environments for extended periods of time without being easily damaged. It can also provide the structural support required for the bottom plate of the ship and increase the strength and stability of the hull. This helps improve the pressure resistance of the hull, allowing it to withstand the vibrations and pressures of sailing. 5154 aluminum plate for ship bottom plate helps reduce the overall weight of the hull and improves the ship’s carrying capacity and fuel efficiency. The lightweight properties also help improve the ship’s maneuverability and navigation performance. Various geometric shapes and size requirements of ship bottom plates can also be met. It can perform bending, cutting, welding, drilling and other processing processes to facilitate installation and adjustment during ship manufacturing.   Specification of 5154 Aluminum Plate for Ship Bottom Plate Alloy 5154 Temper O,H111,H112,H24,H32,H34,H36 Thickness (mm) 1.50-120 Width (mm) ≤3100 Length (mm) 1000-16000 Certification DNV, GL, ABS, CCS, BV, LR Standard GB/T3880, EN 14286, EN 485, ASTM B209, or according to customer’s special requirements Chemical Composition Alloy Si Fe Cu Mn Mg...

Get A Quote