6061 aluminum plate for ship deck

6061 aluminum plate for ship deck can resist the wear and scratches caused by ship hulls in the ocean and port operations. This allows the boat deck to remain smooth and beautiful for a long time and alleviates the need for maintenance and repairs. Due to the harsh marine environment in which ships work, 6061 aluminum plates can resist corrosion in seawater and humid environments. This allows the boat deck to be used in harsh marine environments for extended periods of time without being easily damaged. 6061 aluminum plate for ship deck required structural support and load-bearing capacity. This helps increase the overall strength and stability of the hull, allowing it to withstand the vibrations and external pressures of sailing. Reduce the overall weight of the hull and improve the ship’s carrying capacity, fuel efficiency and maneuverability. Lower density 6061 aluminum sheets perform very well Specification of 6061 Aluminum Plate for Ship Deck Alloy 6061 Temper O,T4,T6,T651 Thickness (mm) ≤60 Width (mm) ≤3100 Length (mm) 1000-16000 Certification DNV, GL, ABS, CCS, BV, LR Chemical Composition Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr 6061 0.40-0.80 0.70 0.15-0.40 0.15 0.80-1.20 0.04-0.35 – 0.25 0.15 – Mechanical Properties Alloy...

Get A Quote

6063 aluminum plate for ship porthole

6063 aluminum plate for ship porthole has a lower density and is lighter than traditional glass materials, which can improve load capacity and fuel efficiency while reducing the ship’s own weight. Portholes are in a marine environment, exposed to the effects of sea water, moisture and salt corrosion. 6063 aluminum plate for ship porthole has excellent corrosion resistance, can effectively resist seawater corrosion and oxidation, and prolong the service life of the porthole. 6063 aluminum plate for ship porthole has a smooth surface and elegant appearance, which can give the ship porthole a modern and simple style and enhance the overall appearance.6063 aluminum plate for ship porthole can effectively isolate the noise and heat conduction inside and outside the ship, providing a more comfortable and quiet environment inside the ship.    Specification of 6063 aluminum plate for ship porthole Alloy 6063 Temper T5/T6 Thickness (mm) ≤60 Width (mm) ≤3100 Length (mm) 1000-16000 Certification ISO,DNV,ABS,LR,CCS Chemical Composition Al Si Cu Mn Mg Cr Zn Ti Fe Na margin 0.2 – 0.6 0.1 0.1 0.45 – 0.9 0.1 0.1 0.1 0.35 0.1 Mechanical Properties Alloy Tensile strength Rm(Mpa) Yield strength Rp0.2(MPa) Elongation A(%) Burst strength Hardness 6063 ≥205 ≥170 ≥10 110MPa 60HB...

Get A Quote

Common classification and use of aluminum tread checkered plate

The aluminum tread checkered plate is the surface of the aluminum alloy plate that undergoes various treatments to present different tread checkereds. According to the needs of different purposes and decorative effects, it can be processed into a series of products with different thicknesses and colors. It not only retains the excellent characteristics of ordinary aluminum alloy materials, but also has some special properties. The following are the specific categories and uses: According to the different classification of aluminum plate alloy Ordinary aluminum tread checkered plate: the aluminum tread checkered plate processed with 1060 aluminum plate as the base can adapt to the ordinary environment and is cheap. Usually cold storage, flooring, and outer packaging use this kind of tread checkered aluminum sheet. Aluminum-manganese alloy tread checkered plate: processed with 3003 as the main raw material, this kind of aluminum plate is also called anti-rust aluminum plate, its strength is slightly higher than that of ordinary aluminum alloy tread checkered plate, and it has certain anti-rust performance, but its hardness and corrosion resistance are not as good as the 5000 series tread checkered plate, so this product is used in rust-proof aspects that do not require strict requirements, such as truck...

Get A Quote

5052 5 bars aluminum tread checkered plate for cold storage and ship floor

The 5 bars aluminum tread checkered plate is one of the more common pattern aluminum plates. It has good anti-skid effect and is widely recognized by users. The  5 bars Anti-slip aluminum tread checkered plate is also called willow-shaped pattern plate because its pattern is similar to willow leaves. The 5052 aluminum tread checkered plate has good anti-skid effect, good corrosion resistance and anti-rust performance, and is often used in some special places, such as cold storage floor and ship floor, which are prone to rust. Specifications of 5052 5 bars aluminum tread checkered plate for cold storage and ship floor Alloy 5052 5 bars aluminum tread checkered plate Temper H32,H114 Thickness(mm) 0.8-8.0 Width(mm) 100-1850 Length(mm) 500-16000 Surface Bright finish, Mill finish Bar difference 1 bar (Diamond/Pointer), 2 bar, 3 bar, big/small 5 bar Standard GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements.   Advantages of 5052 5 bars aluminum tread checkered plate for cold storage and ship floor 5052 aluminum plate has excellent corrosion resistance, especially for seawater and humidity environment. Therefore, it is suitable for applications in shipbuilding and marine environments. 5052 aluminum plate is an alloy with higher strength among aluminum alloys. Provides sufficient strength...

Get A Quote

5052 aluminum plate for door panels

With the development of the times and the advancement of material science and technology, more and more families choose to replace the previous steel and wooden doors with aluminum alloy doors. Aluminum alloy door panels generally use 5052 aluminum plate. As a representative alloy of the 5000 series, 5052 aluminum plates are widely used in various thickness fields, and door panels are one of its thin-plate applications. Specifications of 5052 aluminum plate for door panels   Alloy 5052,5M52 Temper H112 Thickness(mm) 3-20 Width(mm) 500-2500 Length(mm) 500-12000 Standard GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements.   Advantages of 5052 aluminum plate for door panels   The 5052 aluminum plate contains alloying elements such as magnesium and chromium, which has excellent corrosion resistance, and the door panel can still maintain stability without deformation in wet, rainy and corrosive environments. The 5052 aluminum plate has high tensile strength and yield strength, and the door panel has a solid structure and can withstand certain loads and impacts. The 5052 aluminum plate is easy to process and form, and door manufacturers can produce door panels of various shapes, sizes and designs according to customer needs. Compared with other metals, aluminum alloy is...

Get A Quote

Stucco embossed aluminum coil roll jacketing for pipe insulation

Stucco embossed aluminum coil roll jacketing is a specialized type of aluminum material used for pipe insulation in various industries. It provides a protective and aesthetically pleasing covering for insulated pipes, offering both functional and decorative benefits. Stucco embossing is a pattern applied to the surface of the aluminum coil roll. It creates a textured, raised pattern resembling the appearance of stucco or orange peel. Stucco embossed aluminum jacketing acts as a protective covering for pipe insulation systems. It shields the underlying insulation material from physical damage, moisture, UV radiation, and environmental elements. The embossed pattern helps to create an additional layer of insulation by reducing contact points with the pipe surface, minimizing heat transfer, and improving energy efficiency. The stucco embossed aluminum jacketing is cut and rolled to fit each size of pipe insulation correctly. The stucco embossed surface texture hides small imperfections and scratches caused by physical damage during or after installation. Also, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.Click to Order     Specification of stucco embossed aluminum coil roll jacketing for pipe insulation Alloy 1100,3003,3105,5005 Temper O,H14,H16,H24,H26,etc. (Common use: 3003 H14/H16, 1100 H14/H16, 5005...

Get A Quote

6061 aluminum plate for battery tray

The battery module is the core component of new energy vehicles, and the battery tray is the support of the entire battery module, and its structural strength and sealing are related to the safety of the battery. With the advancement of science and technology, the battery tray has undergone continuous development, and has been innovatively developed from materials to processes. Among the lightweight materials for automobiles, the comprehensive cost performance of aluminum alloy materials is higher than that of steel, magnesium, plastics and composite materials. It has comparative advantages in terms of application technology, operation safety and recycling. At present, the battery aluminum tray is generally made of 6061 aluminum plate.Click to Order Specifications of 6061 aluminum plate for battery tray Alloy 6061 aluminum plate Temper T6 Thickness(mm) 0.3-500 Width(mm) 100-2400 Length(mm) 500-16000 Standard GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements.   Alloy Temper Tensile strength Rm(Mpa) Yield strength Rp0.2(MPa) Elongation A(%) 6061 T6 265 245 ≥8   Advantages of 6061 aluminum plate for battery tray The 6061 aluminum plate has good strength characteristics and can bear the weight of battery components and other loads, ensuring the safety of the battery during transportation and use. The...

Get A Quote

8011 Pre-coated hydrophilic aluminum foil for fin stock in heat exchanger air conditioner

8011 Pre-coated hydrophilic aluminum foil has good corrosion resistance, high formability, weldability, excellent mechanical and thermal properties, making it suitable for heat exchanger applications. The pre-coated hydrophilic layer applied to the aluminum foil further enhances its performance and durability. This coating is specifically formulated to have hydrophilic properties, meaning it has an affinity for water, attract and spread water droplets evenly over its surface. When the air conditioner operates, the hydrophilic coating helps to promote the formation of a thin and uniform water film, which facilitates the condensation of moisture from the air onto the fin surface. This allows for quicker and more efficient heat exchange between the air and the refrigerant flowing through the fins.Click to Order Hydrophilic aluminum foil occupies 80% volume of the air conditioner aluminum foil, compared with aluminum fin stock, the surface of the aluminum foil with corrosion-free and hydrophilic layer, therefore it brings the aluminum foil with function of corrosion-free, anti-mildew agent and no off-flavor. Also, pre-coated hydrophilic aluminum foil is compared with fin stock aluminum foil, its cooling efficient increased 5%, therefore it is more idea air conditioner heat exchange material. Hydrophilic aluminum foil can reduce the noise, enhance the condensation process, improve...

Get A Quote

What is the difference between anodized aluminum sheet coil and ordinary aluminum sheet coil？

Anodized Aluminum is a surface treatment technology, usually used for aluminum products, which is to soak ordinary aluminum sheet coils in electrolyte, and then make it oxidize by applying electric current. The oxide film produced during this process will cover the surface of the aluminum product and be evenly distributed throughout the surface. After anodized aluminum sheet coil, the product performance and characteristics are very different. The specific differences are as follows: 1.Surface treatment: The most obvious difference is that anodized aluminum sheet coils are anodized, while ordinary aluminum sheet coils are not. Anodizing is a technique in which an oxide film is formed on the aluminum surface through an electrolytic process. This oxide film provides additional protection and improves the properties of the aluminum surface. 2.Corrosion resistance: Anodized aluminum sheet coils have better corrosion resistance due to the presence of an oxide film, which can better withstand humid and corrosive environments. 3.Surface Hardness: The surface hardness of the anodized aluminum sheet coil is higher, because the oxide film is a hard ceramic layer, which makes it have better wear resistance and scratch resistance in some specific applications. 4.Appearance: Anodized aluminum sheet coils have more appearance options because the oxide...

Get A Quote

High quality 5182 aluminum sheet for fuel tanker

The 5182 aluminum sheet is the latest high-magnesium alloy tanker which was born for the European road dangerous goods transportation agreement in recent years. It has high tensile strength and elongation, exceptional durability and corrosion resistance. 5182 Aluminum sheet plate combination of strength, formability, weldability, and corrosion resistance makes it an ideal choice for constructing fuel tankers that can withstand the demands of transportation while ensuring the safety and integrity of the fuel being transported. 5182 aluminum sheet plate is commonly used in the manufacturing of fuel tankers or tank trailers.   Specification of high quality 5182 aluminum sheet for fuel tanker Alloy 5182 Temper O,H111,H112,H114,H116,H32,etc. Thickness (mm) 4 – 8 Width (mm) 1500 – 3450 Typical width: 1500/1600/1800/2000/2200/2400mm Length (mm) 500 – 16000 Typical length: 5500/5750/6000/7500/7850/8600/11800mm Standards GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements Chemical composition Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr 5182 0.20 0.35 0.15 0.20-0.50 4.00-5.00 0.10 – 0.25 0.10 – Mechanical properties Alloy Temper Tensile strength Rm(Mpa) Yield strength Rp0.2(MPa) Elongation A(%) Minimum Bending Radius of 180 Degree 5182 O/H111 280-350 ≥125 ≥26 1 Ton   Advantages of high quality 5182 aluminum sheet for fuel tanker...

Get A Quote