5086 O Aluminum plate for ship bulkhead

5086 O aluminum plate for ship bulkhead is light in weight and good in corrosion resistance, it is one of the commonly used materials in the shipbuilding industry. The bulkhead of a ship needs to be strong enough to support the structure, while also considering the need for light weight and energy saving. Aluminum plates can meet these requirements, so they are widely used in ship bulkheads in shipbuilding.Click to Order 5086 O aluminum plate for marine bulkheads can be used on all types of vessels including merchant vessels, military vessels and personal recreational vessels. They are commonly used as covering materials for ship bulkheads to isolate the environment inside and outside the cargo hold and to provide strength and stability to the cargo hold structure. The main advantages of 5086 O aluminum plates for ship bulkheads include: light weight, high strength, strong corrosion resistance, easy processing and repair, and good impact resistance. In addition, the aluminum plate can also provide good heat insulation and sound insulation performance, increasing the comfort of the cabin. Features of 5086 O Aluminum Plate for Ship Bulkhead Corrosion Resistance: 5086 O aluminum sheet exhibits excellent resistance to seawater and marine environments, making it highly...

Get A Quote

1100 aluminum plate and 3003 aluminum plate for building curtain wall

1100 aluminum plate and 3003 aluminum plate are two kinds of aluminum plate materials commonly used in building curtain walls. They have some similarities and differences.Both 1100 aluminum plate and 3003 aluminum plate are lightweight materials with low density. This makes them ideal for building curtain walls as they do not add excessive load to the structure. At the same time, both have good corrosion resistance, which can effectively resist the erosion of most chemical substances and environments, thereby prolonging the service life of the curtain wall. Both 1100 aluminum plate and 3003 aluminum plate have good processing performance, and can be bent, cut, welded and surface treated. This makes them easier to process and adjust when fabricating and installing curtain walls.Click to Order However, there are some differences between 1100 aluminum plate and 3003 aluminum plate for building curtain wall,the following takes 1100 H24 aluminum plate and 3003 H24 aluminum plate as examples to introduce the differences between these two aluminum plates. Chemical composition of 1100 aluminum plate and 3003 aluminum plate Alloy Si Fe Cu Zn Mn V Al 1100 0.45 0.35 0.05-0.20 0.01 0.035 0.05 Remainder 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 – Remainder   1100 aluminum alloy is...

Get A Quote

8011 aluminium sheet for PP cap ROPP cap

8011 aluminum sheet is a commonly used material for manufacturing caps, is commonly used for manufacturing PP (Polypropylene) caps, including ROPP (Roll-On Pilfer-Proof) caps. 8011 aluminum sheet is an ideal choice for manufacturing PP caps, including ROPP caps, due to its excellent formability, deep-drawability, lightweight nature, corrosion resistance, heat resistance, compatibility with PP, chemical inertness, customizability, and recyclability. These properties ensure the caps provide reliable sealing, protection, and integrity to the packaged products.Click to Order Specifications of 8011 aluminium sheet for PP cap ROPP cap Alloy Temper Thickness (mm) U.T.S (Mpa) Elongation (%) Earing (%) 8011 H14/H16/H18 0.15-0.28 130-155 ≥2 ≤2 Surface a. Plain mill finish aluminum strip b. DOS oil lubricated finish c. Chromated finish d. One side golden/white/red/blue/black, and other colored, other side protective lacquered e. both sides clear/transparent lacquered   Chemical Composition Alloy Si Fe Cu Mn Mg Cr Zn Ni Ti Other AL Each Total 8011 0.50-0.90 0.60-1.00 0.10 0.20 0.05 0.05 0.10 – 0.08 0.05 0.15 Remain   Features of 8011 aluminium sheet for PP cap ROPP cap Formability: 8011 aluminum sheet has excellent formability, which means it can be easily shaped and formed into the desired cap designs. Deep-Drawability: 8011 aluminum sheet exhibits superior...

Get A Quote

5083 H111 O aluminum alloy plate for tanker body

5083 aluminum alloy is widely used in the construction of tanker bodies due to its excellent combination of strength, corrosion resistance, and weldability. The two commonly used tempers for 5083 aluminum alloy plates in tanker body applications are H111 and O.Click to Order 5083 H111 aluminum alloy plate is a strain-hardened and partially annealed temper. It offers high strength and excellent resistance to corrosion, making it suitable for the demanding conditions encountered in tanker bodies. The H111 temper provides good formability and retains its mechanical properties even after welding. This makes it ideal for fabricating complex shapes and structures required in tanker bodies. The H111 temper ensures the plate maintains its strength and integrity during the transportation and storage of various liquids and gases. 5083 O aluminum alloy plate is in the annealed condition, which means it has undergone full softening. This temper offers excellent formability and ease of fabrication, making it suitable for applications that require intricate shapes and bending. However, compared to the H111 temper, the O temper has lower strength and reduced resistance to corrosion. Therefore, it may be used in applications where the operating conditions are less demanding, or when the tanker body design does not...

Get A Quote

5052 Color Coated Aluminium Coil

The 5052 color coated aluminium coil is a type of aluminum coil that has undergone a color coating process. 5052 color-coated aluminum coil is an aluminum-magnesium, which has excellent corrosion resistance, moderate strength, and good formability. The color coating applied to the coil enhances its aesthetic appeal, durability, and weather resistance, make it a preferred choice in industries where a combination of functionality and visual appeal is required.Click to Order Specification of 5052 Color Coated Aluminium Coil Alloy 5052 Temper H32,H34,H38,H111,H112,H114,HO Thickness (mm) 0.08-5.00 Width (mm) <2650mm Length (mm) C ID 150mm,405mm,505mm,508mm,510mm Coating Paint PE, PVDF Coating thickness PVDF >=25micron POLYESTER>=18micron Paint PPG or Nippon Color RAL or as per customers’ samples Pencil Hardness >2HB Coating Adhesive Not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993) Impact resistance No cracking and peeling (50kg/cm, ASTMD-2794:1993) Bend Strength >100 times Standard YS/T431-2000   Advantages of 5052 Color Coated Aluminium Coil 5052 color coated aluminium coil has aesthetic appeal, durability, weather resistance, corrosion resistance, easy maintenance, lightweight nature, versatility, eco-friendliness, and so on. 5052 color coated aluminium coil can be customized in terms of color, finish, and size to meet customer’s specific requirements. Application of 5052 Color Coated Aluminium Coil 5052...

Get A Quote

The difference between 3003 aluminum plate and 5052 aluminum plate

Introduction of the difference between 3003 aluminum plate and 5052 aluminum plate 3003 aluminum plate and 5052 aluminum plate are two kinds of alloy aluminum plates commonly used in the market, and they are also two common aluminum plate products of Henan Flait Aluminum Co., Ltd. The thickness of 3003 aluminum plate produced by our company is 0.2-4.5mm, which is mostly used for power battery shells, mobile phone shells, etc.; the thickness of 5052 aluminum plate is 0.15-600mm, which is often used in GIS high-voltage switches, marine sheet metal and other places. The following takes 3003H24 aluminum plate and 5052H24 aluminum plate as examples to introduce the differences between these two aluminum plates.Click to Order Chemical composition of 3003 aluminum plate and 5052 aluminum plate Alloy Si Fe Cu Zn Mn Mg Cr Al 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 – – Remainder 5052 ≤0.25 ≤0.40 ≤0.10 ≤0.10 ≤0.10 2.2-2.8 0.15-0.35 Remainder In terms of chemical composition, 3003h24 aluminum plate is an aluminum-manganese alloy. Due to the increase in manganese content, 3003 aluminum plate has excellent corrosion resistance and processability. The 5052h24 aluminum plate is an aluminum-magnesium alloy. Due to the increase in magnesium content, the 5052 aluminum plate has higher strength...

Get A Quote

3003 H24 aluminum plate for building curtain walls

Aluminum curtain wall is a new type of curtain wall material that uses high-quality aluminum alloy plate as the base material, and is formed by numerical control bending technology, and the surface is sprayed with decorative paint. The base material of the aluminum plate is usually a single-layer aluminum alloy plate dedicated to curtain walls such as 1100-H24, 1060-H24, 3003-H24, and 5005-H24. Among them, 3003-H24 has the characteristics of good corrosion resistance, good welding performance and good plasticity (close to super aluminum alloy), and is widely used in the exterior decoration of airports, stations, hospitals, conference halls, opera houses, stadiums and other buildings.Click to Order Specification of 3003 H24 aluminum plate for building curtain walls Alloy 3003 H24 aluminum plate Temper H24 Thickness (mm) 1.5-3.0 Width(mm) 20-2000 Length (mm) 500-16000 Application Various interior and exterior walls of buildings, lobby facades, column decorations, elevated corridors, pedestrian bridges, elevator wrapping, balcony packaging, advertising signs, indoor special-shaped ceilings, etc.   Chemical Composition of 3003 H24 aluminum plate for building curtain walls Alloy Si Fe Cu Zn Mn Al 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 Remainder   Mechanical Properties of 3003 H24 aluminum plate for building curtain walls Alloy Temper Thickness (mm) Mechanical properties Tensile Strength（Mpa） Yield strength...

Get A Quote

Aluminum insulation coil roll with Kraft paper

Aluminum insulation coil with Kraft paper refers to a specific type of thermal insulation material used in various applications, particularly in the HVAC (Heating, Ventilation, and Air Conditioning) industry. It consists of an aluminum coil or strip with a layer of Kraft paper adhered to one side. The combination of the aluminum coil and Kraft paper creates an insulation material that offers both thermal conductivity and moisture protection. The insulation helps prevent heat loss or gain, enhances energy efficiency, and provides temperature control.Click to Order Components and properties Aluminum Coil: The aluminum coil is typically made from an aluminum alloy, such as 1060 or 3003. These alloys are commonly chosen for their thermal conductivity, corrosion resistance, and formability. The aluminum coil acts as the primary thermal conductor, facilitating the transfer of heat or cold in the application. Kraft Paper: Kraft paper is a strong and coarse paper made from wood pulp. It is commonly used as a protective barrier or lining material. In the context of an aluminum insulation coil, the Kraft paper is applied to one side of the aluminum strip. The Kraft paper serves multiple purposes: Moisture Barrier: Kraft paper helps prevent moisture from penetrating the insulation, protecting...

Get A Quote

Color coated aluminum coil

Color coated aluminum coil (prepainted aluminum coil), which is produced with aluminum coil and processed by coating with color, including PE (Polyester) and PVDF (Polyvinylidene Fluoride). Color coated aluminum coils have excellent aesthetics, durability, and corrosion-resistant. It is widely used in aluminum plate, aluminum veneer, aluminum honeycomb panels, aluminum ceiling, shingles, scrap, pop-top, electronics. Flait Aluminum produces color coated aluminum coil of 1000 series, 3000 series, 5000 series and 8000 series.Click to Order PE Color Coated Aluminum Coil PE (polyester) coating is high molecular polymer as monomer and addition of alkyd, is an UV-resistant coating. It can be classified matt and glossy according to coating gloss. The compact molecule structure, makes paint surface luster and smooth，which assure good printing on the panel surface. With a warranty of 8-10 years for weather resistance, it is specially applied for internal decoration and sign board. PE coatings are commonly used for interior applications, such as indoor ceilings, walls, and decorative elements. PVDF Color Coated Aluminum Coil The PVDF color coated aluminum coil uses PVDF paint of famous brands like PPG, VALSPAR and NIPPON, which goes through duplex or triplex coating and high temperature baking to form 25–35μm thick cured coating. As the PVDF...

Get A Quote

Why use 5052 Aluminum sheet for fuel tank？

5052 aluminum sheet is widely utilized in various fuel tank applications, including automotive, marine, and aviation industries. Its corrosion resistance, strength, weldability, formability, and lightweight properties make it a suitable choice for manufacturers looking to construct durable and efficient fuel tanks.Click to Order 5052 aluminum sheet is commonly used for fuel tanks due to several reasons Corrosion Resistance: 5052 aluminum sheet offers excellent resistance to corrosion, including resistance to rust and corrosion caused by fuel and other chemicals. This is particularly important for fuel tanks, as they come into contact with corrosive substances such as gasoline, diesel, and other fuels. The corrosion resistance of 5052 aluminum helps ensure the durability and longevity of the fuel tank. Strength and Durability: 5052 aluminum sheet has good strength and durability properties. It has a high tensile strength and is resistant to deformation, making it suitable for fuel tank applications where structural integrity is crucial. The strength of 5052 aluminum allows the tank to withstand various loads, impacts, and vibrations that can occur during transportation or use. Lightweight: Aluminum, including 5052 alloy, is lightweight compared to many other metals. This lightweight property is advantageous for fuel tanks as it helps reduce the overall weight...

Get A Quote