Aluminum sheets for bottle cap materials supplier

Aluminum alloy bottle cap materials are widely used in product packaging. The aluminum alloy bottle cap materials produced by Flait Aluminum have good deep drawing performance, low ear forming rate, and also have a certain strength after being baked in the cap making process. Aluminum closure materials also have great advantages in terms of sealing and aesthetics. Aluminum sheets plates are often used in sealing packaging of beverage bottles, wine bottles, cosmetic bottles, medicine bottles, etc. Commonly used aluminum plates for bottle caps are: 8011 aluminum plate, 3105 aluminum plate, 1235 aluminum plate, 1070 aluminum plate, 1060 aluminum plate, 5052 aluminum plate coil. Medicinal aluminum bottle caps usually use 8011 aluminum foil, which is mainly used for the closed port of infusion bottles, its thickness ranges from 0.018-0.04mm and has good sealing properties.  3105 aluminum plate is mainly used in cosmetic bottle caps, which can be made into different shapes and painted in bright colors.  5052 aluminum plate coil is mainly used for the caps of cans, its hardness is slightly better than that of other alloys, can effectively solve the deformation caused by the impact of cans during transportation and ensures the appearance. Aluminum Series 1 series, 3 series, 5...

Get A Quote

Difference between 6061 aluminum plate T6 and T651

6061 aluminum plate is widely favored by consumers for its good mechanical properties, processability, weldability and corrosion resistance, and these properties are due to its multiple states or heat treatments to choose from. The main states of 6061 aluminum plate include F, O, T4, T6, T651, etc., among which 6061 T6 and 6061 T651 are the two most commonly used states. This article will explain the differences between the two. What do aluminum 6061 T6 and T651 stand for? 6061 T6 and 6061 T651 are two heat treatment states, among which: T6 state:6061 aluminum alloy undergoes artificial aging after solution heat treatment. During solution treatment, aluminum alloys are heated to high temperatures and then rapidly cooled to increase hardness. Next, it is heated again to a lower temperature and aged to further enhance the material’s properties. Aluminum alloy in T6 state has good strength and corrosion resistance. T651 state:6061 aluminum alloy is stretched and balanced based on the T6 state. This process is called Stretching Balance Treatment. Its purpose is to make the internal stress distribution of the aluminum alloy more uniform by adjusting it. Therefore, aluminum alloy in T651 state has better mechanical properties and resistance to deformation. What’s...

Get A Quote

5083 H116 marine grade aluminum plate for shipbuilding

5083 aluminum plate is the most commonly used marine grade aluminum plate. Commonly used states include O, H111, H112, H116 and H321. 5083 H116 marine grade aluminum plate is a commonly used marine aluminum plate in Europe. It has the characteristics of low density, light weight, high tensile strength and high elongation. After heat treatment, it has good cutting processability, corrosion resistance and welding performance. 5083 H116 aluminum plate is specially designed for the marine environment. Its toughness, strength, and corrosion resistance are extremely excellent, and it can protect the hull from being damaged by seawater and various microorganisms when it is exposed to seawater for a long time.At the same time, its weight is lower than other alloy series, enabling low fuel consumption, low pollution and high transportation efficiency, making it the preferred material for the shipbuilding industry. Performance of 5083 H116 marine grade aluminum plate  5083 H116 aluminum plate is a high magnesium alloy that has good strength among non-heat treatable alloys and has good corrosion resistance, machinability, weldability and processability. Alloy-Temper:5083 H116 Tensile strength Rm(Mpa):≥305 Yield strength Rp0.2(MPa):≥215 Elongation A(%):≥10 Hardness HBWα:89 Specification of 5083 H116 marine grade aluminum plate Alloy-Temper:5083 H116 Thickness (mm):1.50-120 Width (mm):≤3100 Length...

Get A Quote

8006 HO/H22 Air Conditioning Aluminum Foil

As air conditioners are gradually developing towards miniaturization, high efficiency, and long service life; air conditioner heat exchange fins need to be increasingly thinner and have high strength. Aluminum foil has good thermal conductivity, low density, light weight, and is widely used as fins for air conditioner radiators. The air-conditioning aluminum foil is punched and flanged by a punch machine to be made into heat dissipation fins; then it is threaded through tubes, expanded, degreased, and assembled to become a heat exchanger. 8006 hydrophilic aluminum foil for air conditioners can effectively extend the life of air conditioners, reduce power consumption, improve ventilation quality and improve refrigeration effects. Air conditioning aluminum foil is widely used in heat exchanger fins of household air conditioners, commercial air conditioners, automobile air conditioners, automobile water tanks, vending machines, etc. 8006 air conditioning heat exchangers aluminum foil, including uncoated aluminum foil (bare/plain) and coated hydrophilic aluminum foil (blue and gold/golden). Contact us to get free samples. The difference between 8006 coated air conditioning aluminum foil and uncoated air conditioning aluminum foil 1. 8006 bare air conditioning aluminum foil 8006 bare air conditioning aluminum foil refers to aluminum foil that has been rolled and annealed without any...

Get A Quote

Thickness and width of transformer aluminum strip foil

Aluminum strips and foils for transformer and cables Materials: 1060, 1050, 1070, 1350 Temper: O/HO Thickness: 0.08mm–3.0mm Width: 20mm-1600mm Resistivity: ≤ 0.028 ID: 300mm or 500mm Surface: Smooth, no scratches, the edges can be chamfered (rounded corners, rounded edges) without burrs. Packing: wooden pallet, eye to sky/eye to wall. With the rapid development of the power industry, transformers, as the core equipment of the power grid, have more attention for their performance and safety. Transformer aluminum strip is an important part of the transformer, and its thickness and width standard specifications play an important role in improving the performance and safety of the transformer. Reasonable width and thickness of the aluminum strip can improve the conductivity, current carrying capacity, heat dissipation effect and ensure the normal operation of the transformer. In transformers, aluminum strip is an important material, and the choice of its thickness and width have an important impact on the performance of the transformer. Usually, transformer aluminum strips are divided into different alloys, specifications, and tempers according to their uses. The main alloys are: 1060/A1060, 1050/A1050, 1070/A1070, 1350; tempers: O/HO (soft status); thickness: 0.08-3.00mm. Thickness and width of transformer aluminum strip foil 1. Factors affecting aluminum strip thickness...

Get A Quote

5052 H32 aluminum sheet for 3C products

Modern life relies heavily on computers, communications and consumer electronics products, such as mobile phones, tablets, power banks, TVs, etc., which are indispensable supplies. These are 3C products, which are closely related to people’s daily lives. With the advancement of materials, more and more 3C products use aluminum alloy casings. Among them, 5052 aluminum sheet, 6061 aluminum sheet and 6063 aluminum sheet are common base materials for 3C products. 5052 H32 aluminum sheet is one of the representative products and is widely used in brackets and casings of mobile phones, laptops, pads and other products. Why is 5052 H32 aluminum sheet so popular in 3C products? 5052 H32 aluminum sheet has moderate tensile strength and adapts to the lightweight requirements of 3C products; 5052 H32 aluminum sheet has rich surface treatment technology, is easy to color, and has no black lines or grains after anodization. Moderate brightness, meeting high-end surface quality requirements; 5052 H32 aluminum sheet has moderate hardness, is easy to process and form, has a short production process and good stamping effect, meeting the needs of efficient output of consumer electronics products. 5052 H32 aluminum sheet has excellent corrosion resistance and scratch resistance after anodization, making it durable....

Get A Quote

The difference of three tempers of 6061 aluminum sheet plate-F/O/T6

6061 aluminum plate is one of the aluminum plate alloys with a wide range of applications. It has medium strength and is deeply loved by users due to its advantages such as good corrosion resistance, excellent weldability, and good anti-oxidation effect. At present, 6061 aluminum plates are widely used in automobile manufacturing, precision machining, mold manufacturing, automated machinery parts, ship parts and other fields. Commonly used tempers of 6061 aluminum plates include F, O, T, etc. Different applications have different product performance requirements, and the tempers of the aluminum plates used are also different. This article will take you through the differences between the three tempers of 6061 aluminum plates: F, O and T6. Introduction to the three tempers of 6061 aluminum sheet plate F, O and T6 6061 F aluminum sheet plate. F represents the free processing state, which is suitable for special products with work hardening and heat treatment conditions during the molding process. The F-state aluminum plate needs to go through medium-thick plate slicing-sawing-polishing (not polished)-packaging. The production process is very short. There are no specifications for the mechanical properties of the F-state. Customers can heat-treat the F-state according to their own needs to produce the required...

Get A Quote

1060 VS 5052 anti-slip aluminum sheet plate coil

1060 and 5052 anti-slip aluminum sheet plate coil, also called aluminum tread plate, aluminum textured plate, aluminum checker plate, aluminum chequer plate, pattern aluminum plate. Aluminum anti-slip plate coil is rolled with a roller press to form protruding patterns on the surface of the aluminum flat plate. 1060 & 5052 anti-slip aluminum plates sheets are mainly used for anti-skid floors. There are many types of pattern plates, such as five bars pattern aluminum plate, diamond pattern aluminum plate, 2 bars and 3 bar pattern aluminum plate, etc. 1060 VS 5052 anti-slip aluminum sheet plate coil  1. Chemical composition 1060 anti-slip aluminum sheet plate is pure aluminum, containing up to 99.6% aluminum. Its chemical composition mainly includes aluminum and some trace metal elements, such as 0.03% magnesium, 0.05% zinc, 0.03% manganese, 0.03% titanium, 0.05% vanadium, 0.35% iron and other elements. 5052 anti-slip aluminum sheet plate belongs to the AL-Mg series alloy aluminum coil plate, which is mainly composed of aluminum (about 95%) and magnesium (about 4%), and contains a small amount of other metal elements. 2. Mechanical properties 5052 anti-slip aluminum sheet plate has higher hardness, elongation and tensile strength than 1060 anti-slip aluminum plate. Generally, the hardness of 5052 aluminum...

Get A Quote

8011 O/H22 Air Conditioning Aluminum Foil

Air conditioning aluminum foil is also called air conditioning fin aluminum foil and hydrophilic aluminum foil. Coating colors are bare, blue and gold. Air conditioning aluminum foil is mainly used in heat exchange equipment, refrigeration equipment, radiators, condensers and evaporators; it has the advantages of good shape, good coating performance, high adhesion, good hydrophilicity, and good corrosion resistance. Hydrophilicity of air conditioning aluminum foil is very strong, the evaporator and condenser can easily produce condensed water; The condensed water will spread quickly on the surface of the hydrophilic aluminum foil, and will not gather together and form water droplets, and then the condensed water adheres to the hydrophilic aluminum foil and flows into the drainage system, can effectively improve the heat dissipation effect. 8011 air conditioning aluminum foil is an excellent thermal conductive material and an ideal choice for air conditioning heat exchange fins. It has good thermal conductivity and can quickly transfer the cold and heat of the air conditioning system to the external environment. In addition, 8011 air conditioner aluminum foil is lightweight and corrosion-resistant, making it not easily damaged during long-term use, extending the service life of the air conditioner. 8011 air-conditioning aluminum foil is mainly used...

Get A Quote

Anodized Aluminum vs. Pre-painted Aluminum: The Difference

Anodized Aluminum and Pre-painted Aluminum are both commonly used surface treatments for aluminum alloys. Both Anodized Aluminum and Pre-painted Aluminum are widely used in the field of architectural decoration, but there are still some differences between them. The Difference between anodized aluminum and pre-painted aluminum 1. Different processes Anodized aluminum is a method of forming an oxide layer on the surface of aluminum alloy through electrolysis reaction. When current is passed through the electrolyte, the surface of the aluminum alloy will oxidize, forming a hard oxide layer. Pre-painted aluminum is a method of spraying paint onto the metal surface. The sprayed paint will form a protective film after drying on the surface to prevent the aluminum alloy from being oxidized, corroded and worn. Commonly used spray coating materials include PE (Polyester) and PVDF (Polyvinylidene Fluoride). 2.Durability is different The anodized film is formed through a displacement reaction on the metal surface. The hardness and density of the film are relatively high, so it has good durability. The paint has poor durability and is easily peeled off by scratches, chemicals and direct sunlight. Generally speaking, anodized aluminum is more weather-resistant, more scratch-resistant and has a longer service life than pre-painted aluminum....

Get A Quote