What is the difference between anodized aluminum sheet coil and ordinary aluminum sheet coil？

Anodized Aluminum is a surface treatment technology, usually used for aluminum products, which is to soak ordinary aluminum sheet coils in electrolyte, and then make it oxidize by applying electric current. The oxide film produced during this process will cover the surface of the aluminum product and be evenly distributed throughout the surface. After anodized aluminum sheet coil, the product performance and characteristics are very different. The specific differences are as follows: 1.Surface treatment: The most obvious difference is that anodized aluminum sheet coils are anodized, while ordinary aluminum sheet coils are not. Anodizing is a technique in which an oxide film is formed on the aluminum surface through an electrolytic process. This oxide film provides additional protection and improves the properties of the aluminum surface. 2.Corrosion resistance: Anodized aluminum sheet coils have better corrosion resistance due to the presence of an oxide film, which can better withstand humid and corrosive environments. 3.Surface Hardness: The surface hardness of the anodized aluminum sheet coil is higher, because the oxide film is a hard ceramic layer, which makes it have better wear resistance and scratch resistance in some specific applications. 4.Appearance: Anodized aluminum sheet coils have more appearance options because the oxide...

Get A Quote

High quality 5182 aluminum sheet for fuel tanker

The 5182 aluminum sheet is the latest high-magnesium alloy tanker which was born for the European road dangerous goods transportation agreement in recent years. It has high tensile strength and elongation, exceptional durability and corrosion resistance. 5182 Aluminum sheet plate combination of strength, formability, weldability, and corrosion resistance makes it an ideal choice for constructing fuel tankers that can withstand the demands of transportation while ensuring the safety and integrity of the fuel being transported. 5182 aluminum sheet plate is commonly used in the manufacturing of fuel tankers or tank trailers.   Specification of high quality 5182 aluminum sheet for fuel tanker Alloy 5182 Temper O,H111,H112,H114,H116,H32,etc. Thickness (mm) 4 – 8 Width (mm) 1500 – 3450 Typical width: 1500/1600/1800/2000/2200/2400mm Length (mm) 500 – 16000 Typical length: 5500/5750/6000/7500/7850/8600/11800mm Standards GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements   Chemical composition Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr 5182 0.20 0.35 0.15 0.20-0.50 4.00-5.00 0.10 – 0.25 0.10 –   Mechanical properties Alloy Temper Tensile strength Rm(Mpa) Yield strength Rp0.2(MPa) Elongation A(%) Minimum Bending Radius of 180 Degree 5182 O/H111 280-350 ≥125 ≥26 1 Ton   Advantages of high quality 5182 aluminum sheet for...

Get A Quote

What’s the difference between 3105 and 8011 aluminum sheet plate used in bottle cap material?

3105 and 8011 are two common aluminum alloys used in the production of bottle caps. Each alloy has its own characteristics and advantages, making them suitable for different applications in the bottle cap manufacturing industry. 3105 aluminum sheet has enough strength, so it is stronger enough to bear the gas pressure, so it is widely used for making screw cap for gas liquid bottle, such as soda water, carbonated wine and champagne. 8011 aluminum sheet is used for ROPP cap, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off caps.Click to Order The difference between 3105 and 8011 aluminum sheet plate used in bottle cap material 1.Chemical composition and mechanical properties: 3105 Aluminum plate is an aluminum-manganese alloy, it also contains trace amounts of other elements such as copper, iron, and silicon. 8011 Aluminum plate is an aluminum alloy with elements including aluminum, iron, and silicon. It may also contain small amounts of other elements such as copper and zinc. Chemical Composition Alloy Si Fe Cu Mn Mg Zn Ti Others Al 3105 ≤0.6 ≤0.7 ≤0.3 0.3-0.8 0.2-0.8 ≤0.40 ≤0.10 ≤0.15 Remainer 8011 0.5-0.9 0.6-1.0...

Get A Quote

1060 Color coated pre-painted aluminum coil

1060 color coated pre-painted aluminum coil is a pure aluminum and contains 99.6% aluminum elements that is low in strength and good in deep drawing quality. 1060 aluminum coil is good for anodizing and bright surface, so it is an ideal aluminum to make mirror sheets and color coated mirror sheet coils. 1060 color coated pre-painted aluminum coil is widely used in roofing, ceiling, heat insulation, curtain walls etc. Click to Order Specification of 1060 Color Coated Pre-painted Aluminum Coil Alloy 1060 Thickness (mm) 0.08-5.00 Width (mm) ＜2650mm Length (mm) C ID 150mm,405mm,505mm,508mm,510mm Coating Paint PE,PVDF Coating thickness 4μm-20 μm for one-time coating, 25μm-28 μm for twice coating, 35μm-38μm for three-time coating Color Blue,red,green,pink,purple,brown,white,black(RAL or as required by clients) Standard YS/T431-2000   Advantages of 1060 Color Coated Pre-painted Aluminum Coil Good temperature resistance. The melting point of aluminum is 660 degrees, and the general temperature does not reach its melting point. Environmentally friendly. The color of the aluminum coil does not change even under a test in chromium-free treatment solution. The roller paint contains active chemical molecules to promote the formation of a protective layer on the surface of the coil and active chemical molecules are stable and easy to...

Get A Quote

5083 medium thick aluminum plate for shipbuilding

5083 medium thick aluminum plate for shipbuilding has high strength, can provide the structural support required by the ship, and maintain the strength and stability of the hull. Compared with traditional steel, aluminum has a lower density, which reduces the overall weight of the ship and improves the ship’s carrying capacity and fuel efficiency. 5083 medium thick aluminum plate for shipbuilding has excellent corrosion resistance, especially good resistance to corrosion in seawater and humid environments. This allows the ship to be used in harsh marine environments for extended periods of time without being susceptible to damage and corrosion. 5083 medium thick aluminum plate is easy to process and form, and can be bent, cut, punched and welded to meet the needs of different ship designs. It is relatively flexible and can adapt to the curved shape and complex structural requirements of the hull.Click to Order Features of 5083 Medium Thick Aluminum Plate for Shipbuilding Good corrosion resistance: 5083 aluminum plate has excellent corrosion resistance to seawater and other corrosive media, and is suitable for ships and equipment in marine environments. High strength: 5083 aluminum plate has high tensile strength and yield strength, which enables it to withstand the load and...

Get A Quote

5052 medium thick aluminum plate for car shell

5052 medium thick aluminum plate for car shell is relatively light compared to many other materials and has excellent strength. This enables it to provide strong structural support to the car while reducing the overall weight of the vehicle. Reducing vehicle weight can help improve fuel efficiency and reduce energy consumption. 5052 medium thick aluminum plate for car shell has excellent corrosion resistance, which enables it to maintain a long service life in the face of harsh environmental conditions such as daily humidity, salt spray, and acid rain, and is not prone to corrosion problems. 5052 medium thick aluminum plate for car shell is easy to cut, bend, punch and weld. It has good formability, can adapt to various complex shape requirements, and can meet the manufacturing needs of different models.Click to Order Features of 5052 medium thick aluminum plate for car shell Lightweight and high strength: 5052 medium thick aluminum plate is relatively light and has excellent strength, which can provide good shock and vibration resistance. Excellent corrosion resistance: 5052 medium thick aluminum plate has good corrosion resistance, can resist the erosion of most chemical media, and effectively prolong the service life of the shell. Excellent processing performance: 5052...

Get A Quote

5454 marine grade aluminum plate for hull

5454 marine grade aluminum plate for hull can withstand corrosion in seawater and humid environments. This allows the ship to be used in harsh marine environments for extended periods of time without being easily damaged. It can also provide the structural support required by the hull and increase the strength and stability of the hull. This improves the overall performance and durability of the vessel.Click to Order Relative to traditional ship construction materials, 5454 marine grade aluminum plate for hull has lower density and weight, helping to reduce the overall weight of the ship. This improves the ship’s carrying capacity and fuel efficiency, and results in better maneuverability and navigation performance. Various geometric shapes and size requirements of the hull can also be met. It can perform bending, cutting, welding, drilling and other processing processes to adapt to the needs of different ship designs. Features of 5454 marine grade aluminum plate for hull Good corrosion resistance: 5454 aluminum plate shows good corrosion resistance in the marine environment, can resist the erosion of corrosive media such as chloride ions, and reduce the corrosion loss of ships. High strength: 5454 aluminum plate has high strength, which can meet the requirements of the...

Get A Quote

6101 aluminum plate for new energy vehicle charging pile

With the popularity of new energy vehicles, the demand for charging piles is also increasing. As a lightweight, corrosion-resistant, and easy-to-process material, aluminum alloy is gradually becoming the material of choice for new energy charging piles. 6101 aluminum sheet is a high-strength aluminum sheet that is commonly used in conductive applications and electrical equipment manufacturing. It is composed of elements such as aluminum, magnesium and silicon, and has excellent electrical conductivity and mechanical strength. Compared with 1100 aluminum plate, 6101 aluminum plate has higher strength. 6101 aluminum plate also has good processing performance, and can be processed by forming, bending and welding. This makes 6101 aluminum sheet suitable for manufacturing structural components and housings of charging piles.Click to Order Specifications of 6101 aluminum plate for new energy vehicle charging pile Alloy 6101 aluminum sheet Temper F,O, T4,T6,T651,H112,etc. Thickness(mm) 0.3-500 Width(mm) 100-2650 Length(mm) 500-16000 Application High-strength aluminum materials for buses, electrical conductors and radiators, busbar conductors, etc.   Advantages of 6101 aluminum plate for new energy vehicle charging pile 6101 aluminum plate has good corrosion resistance and can be used for a long time in harsh environments. Charging piles installed outdoors are often affected by natural environments such as rain, wind...

Get A Quote

Why use 5182 Aluminum sheet for car body?

5182 aluminum plate is an aluminum alloy plate whose main components include aluminum (Al) and a small amount of magnesium (Mg) and chromium (Cr). It belongs to the 5xxx series of aluminum alloys and is widely used in car body manufacturing in the automotive industry. It has the characteristics of high strength, corrosion resistance and good processability.It can be used for doors, roofs, decks, hoods, tailgates, and more.Click to Order Specifications of 5182 Aluminum sheet for car body Alloy Temper Thickness(mm) Width(mm) Length(mm) Standard 5182 O, H111 0.50 – 3.50 1200 – 2650 500 – 16000 EN/ASTM   Alloy Si Fe Cu Mn Mg Cr Zn Ti Al 5182 0.20 0.36 0.15 0.20-0.50 4.00-5.00 0.10 0.25 0.10 Remainder   5182 Aluminum sheet is commonly used for car body due to several reasons: Lightweight: 5182 aluminum plate is lighter than traditional steel. It has a lower density and thus reduces the weight of the entire car body. This is very attractive to automakers because reducing body weight can improve fuel efficiency and reduce carbon emissions. High strength: Although the 5182 aluminum plate is relatively light, it still has high strength. This high strength allows the aluminum body to provide excellent impact resistance and...

Get A Quote

6061 T6 aluminum sheet for car wheels

6061 T6 aluminum alloy is a commonly used alloy that is widely used in various industries including automotive applications. It is prized for its excellent strength-to-weight ratio, which makes it ideal for use in automotive wheels. The T6 treatment state of 6061 aluminum plate refers to the process of aging treatment after solution heat treatment. This treatment increases the strength and hardness of the material, making it more suitable for high-performance components such as automotive wheels.Click to Order   The Product Specification of 6061 T6 aluminum sheet for car wheels Alloy 6061 T6 aluminum sheet Temper F,O,T4,T6,T651,etc Thickness(mm) 0.3-500 Width(mm) 500-2650 Length(mm) 500-16000 Standard GB/EN/ASTM Application Mobile phone card slots, mobile phone cases, battery trays, auto parts, containers, precision machining, molds, mask machines, etc.   Mechanical properties of 6061 T6 aluminum sheet for car wheels Alloy Temper Tensile strength Rm(Mpa) Yield strength Rp0.2(MPa) Elongation A(%) 6061 T6 ≥260 ≥240 ≥9   The Product Features of 6061 T6 aluminum sheet for car wheels 6061 T6 aluminum sheet has higher strength 6061 T6 aluminum sheet has good machinability, including weldability 6061 T6 aluminum plate has good corrosion resistance and oxidation resistance 6061 T6 aluminum plate is light in weight 6061 aluminum sheet is widely...

Get A Quote