1060 O aluminum strip foil for transformer winding

1060 aluminum strip foil is made from pure aluminum alloy, which contains 99.6% aluminum as the primary element. It is typically produced in the “O” temper, which signifies a soft and annealed condition. 1060 aluminum strip foil has high electrical and thermal conductivity, lightweight, flexibility, and formability. 1060 aluminum strip is used for transformer winding in power systems, electrical equipment, and electronics. Flait Aluminum provides various thicknesses and widths, depending on the specific requirements of transformer windings.Click to Order   Specification of 1060 O aluminum strip foil for transformer winding Alloy 1050，1060，1070，1350 Temper HO/O Thickness 0.014-2.0 mm Width 20-1350mm Conductivity Number (% IACS) ≥61 Resistivity number (Ω·mm² /m) ≤0.027548 Elongation (%) 20 Tensile strength(Mpa) >60 Density in 20°C 2.7kg/cm3   Chemical composition of 1060 O aluminum strip foil for transformer winding Alloy Al (%) MIN Si (%) Max Fe (%)Max Cu (%) Max Mn (%) Max Zn(%) Max Mg(%) Max Ti(%) Max Other elements (%) 1050 99.50 0.25 0.40 0.05 0.05 0.05 0.05 0.03 0.03 1060 99.60 0.25< 0.35 0.05 0.03 0.05 0.03 0.03 0.03 1070 99.70 0.25 0.04 0.03 0.04 0.04 0.03 – 0.03 1350 99.50 0.10 0.05 0.01 0.01 – – – 0.03   Advantages of 1060 O aluminum strip foil for transformer winding High Electrical...

Get A Quote

What are the benefits of using aluminum plates for tank truck body?

From the perspective of environmental and social benefits, global warming has become the focus of everyone’s attention, and the main reason for this is the relatively high emission of greenhouse gas CO2. According to the research report of the European Aluminum Association, every car used 1KG of aluminum alloy can reduce CO2 emission by 28KG. That is to say, if the aluminum alloy tank body is used to reduce the weight by 5 tons, the total CO2 emission can be reduced by 140 tons, the environment will be greatly improved, and the social benefits will be obvious. Therefore, aluminum alloy has incomparable advantages in terms of economic benefits, safety, environment and social benefits. Tank trucks are tank-shaped transport vehicles used to transport various liquids, liquefied gases, and powdered goods. At present, the materials used for oil tankers are mainly carbon steel and aluminum alloy. A complete tanker body generally requires 4-6 pieces of aluminum plates to be welded together. The most important tank body is made of 5083-H111 aluminum plates. The can lid is made of 5083-O aluminum plate, which is softer, but the can lid needs to be bent, and the partition part is also made of 5083-O. In...

Get A Quote

5456 H111 Aluminum plate for ship bulkhead

5456 H111 Aluminum plate for ship bulkhead can provide the structural support required for the bulkhead, increasing the strength and stability of the hull. It also has excellent corrosion resistance for seawater and humid environments. This makes it less susceptible to corrosion and damage in the marine environment, extending the service life of ship bulkheads.Click to Order Relative to traditional ship construction materials, 5456 H111 aluminum plates have lower density and weight. This helps reduce the overall weight of the vessel, improves the vessel’s fuel efficiency, and provides better maneuverability and sailing performance. Meet various geometric shapes and size requirements for ship bulkheads. It can perform bending, cutting, welding and drilling processes to adapt to the needs of different ship designs.  Features of 5456 H111 Aluminum Plate for Ship Bulkhead High strength: 5456 H111 aluminum plate has high yield strength and tensile strength, which can meet the strength requirements of ships in different fields. Corrosion resistance: The aluminum alloy material has good corrosion resistance and can resist corrosion and oxidation in marine environments. Good processability: 5456 H111 aluminum plate has excellent plasticity and welding performance, and is easy to process into parts of various shapes and sizes. Lightweight: Compared with...

Get A Quote

Engraved Aluminum Plate

As an emerging material in the modern building materials industry, aluminum sheets play an important role in the building materials industry. Among them, engraving the aluminum plate is to use a computer numerical control engraving machine to engrave various patterns or characters on the aluminum plate on a numerical control punching machine, and then shape it according to needs. Engraved aluminum panels are generally used in high-rise buildings such as building exterior walls, beams and columns, balconies, canopies, airports, stations, subway stations, indoor curtain walls, ceiling decorations, conference halls, opera houses, stadiums, and reception halls. The engraved aluminum plates produced by Flait Aluminum use 5052, 5052A, 5052B and other aluminum plates as base materials, and are engraved with the help of large engraving machines.Click to Order The Specification of engraved aluminum plate　 Alloy 5052,5052A,5052B Temper H112 Thickness(mm) 0.3-500 Basic size(mm) 1500*3000(flat) Application Roof panels, aluminum alloy door panels, screens, engraved panels, curtain walls, etc.   The Features of engraved aluminum plate Lightweight and Durable: Aluminum is lightweight and has excellent strength, which can support a variety of intricate engraving designs and has long-term durability. Anti-Corrosion: Aluminum has excellent corrosion resistance and will look good in both indoor and outdoor environments. Plasticity: The...

Get A Quote

Application and advantages of automotive aluminum alloys

With the continuous development of automotive manufacturing technology and the increasing environmental awareness, automotive aluminum alloys have been widely used in the automotive industry as lightweight and high-strength materials. This article will introduce several common aluminum alloy grades and their specific applications in automotive manufacturing, as well as discuss the advantages of Automotive aluminum alloys in this field.Click to Order 5xxx Series Automotive aluminum alloys: Example alloys: 5052, 5754, 5182, etc. Applications: Body panels: 5xxx series automotive aluminum alloys have excellent corrosion resistance and weldability, making them suitable for manufacturing automotive body panels such as outer shells, doors, and engine hoods. Fuel tanks: Aluminum alloy fuel tanks reduce the overall weight of the vehicle, improving fuel efficiency and overall performance. 6xxx Series Automotive aluminum alloys: Example alloys: 6061, 6063, etc. Applications: Structural components: 6xxx series Automotive aluminum alloys offer high strength and good processability, commonly used in the production of automotive chassis and body structural components such as suspension systems, wheels, and frames. Radiators: Aluminum alloy radiators improve the heat dissipation efficiency of vehicles, helping to maintain the normal operating temperature of engines and other critical components. 7xxx Series Automotive aluminum alloys: Example alloys: 7075, 7050, etc. Applications: Wheels: 7xxx series Automotive aluminum alloys possess...

Get A Quote

The difference between 3003 aluminum plate and 3004 aluminum plate

Introduction of the difference between 3003 aluminum plate and 3004 aluminum plate Both 3003 aluminum plate and 3004 aluminum plate are aluminum alloy plates, both of which have good corrosion resistance and can resist the erosion of general atmosphere, water and acid-base media. Both 3003 and 3004 aluminum sheets have good formability and are easy to perform processing operations such as cutting, bending and forming. At the same time, both 3003 and 3004 aluminum plates have good welding performance, and can be connected and assembled by common welding methods.Besides that, there are a few differences between the two.  Click to Order Chemical composition of 3003 aluminum plate and 3004 aluminum plate Alloy Si Fe Cu Zn Mn Mg Al 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 – Remainder 3004 0.30 0.70 0.25 0.25 1.0-1.5 0.8-1.3 Remainder 3003 aluminum plate: mainly composed of aluminum and a small amount of manganese, and its chemical composition is Al-Mn alloy. 3004 aluminum plate: mainly composed of aluminum, manganese and a small part of magnesium, and its chemical composition is Al-Mn-Mg alloy. Mechanical properties of 3003 aluminum plate and 3004 aluminum plate Alloy Temper Thickness(mm) Mechanical properties Tensile Strength（Mpa） Yield strength Rp0.2(MPa) Elongation δ10 (%) 3003...

Get A Quote

5083 H321 aluminum plate for ship hull

5083 H321 aluminum plate is usually used for the outer shell of the hull. The hull of a ship needs to be strong and rigid enough to withstand the forces and pressures experienced during navigation. Due to the high strength-to-weight ratio of 5083 H321 aluminum plate, the use of aluminum plate can reduce the overall weight of the hull and improve the speed and fuel efficiency of the ship.Click to Order The corrosion resistance of 5083 H321 aluminum plate also makes it one of the preferred hull materials. When a ship sails in seawater, it is subject to erosion and corrosion from seawater, so hull materials need to be able to resist these effects. 5083 H321 aluminum plate can resist seawater corrosion and prolong the service life of the hull. Features of 5083 H321 Aluminum Plate for Ship Hull  High strength: 5083 H321 aluminum plate has excellent yield strength and tensile strength, which can withstand the large external force load of the ship at sea. Good corrosion resistance: through proper heat treatment and chemical composition control, the aluminum alloy plate can resist corrosion and oxidation for a long time in the marine environment and prolong the service life of the...

Get A Quote

6063 aluminum plate for auto parts

Driven by energy saving and emission reduction, automobile lightweight has become the general trend. Aluminum alloy materials are lighter in weight, and many parts in vehicle configurations begin to use aluminum alloy materials, such as car wheels, fuel tanks, engines, four doors and two covers, and car interior parts. 6063 aluminum plate is a commonly used type of automotive aluminum plate. It is a heat-treatable alloy with medium strength in the AL-Mg-Si system. It has lower strength than 6061, high impact toughness, excellent welding performance and corrosion resistance, and no tendency to stress corrosion cracking.Click to Order The Specification of 6063 aluminum plate for auto parts Alloy 6063 aluminum plate Temper F,O,T4,T6,T651,etc. Thickness(mm) 0.3-500 Width(mm) 100-2400 Length(mm) 500-16000 Standard GB/EN/ASTM   The Features of 6063 aluminum plate for auto parts 6063 aluminum plate has good machinability, easy forging, bending, dyeing and surface treatment. 6063 aluminum plate has good corrosion resistance under most environmental conditions, especially for marine and industrial atmospheric environments. 6063 aluminum plate has higher strength and is lighter than ordinary steel, which can meet the requirements of high strength and light weight for auto parts. 6063 aluminum sheet has good plasticity and can meet the requirements of auto parts...

Get A Quote

5086 O Aluminum plate for ship bulkhead

5086 O aluminum plate for ship bulkhead is light in weight and good in corrosion resistance, it is one of the commonly used materials in the shipbuilding industry. The bulkhead of a ship needs to be strong enough to support the structure, while also considering the need for light weight and energy saving. Aluminum plates can meet these requirements, so they are widely used in ship bulkheads in shipbuilding.Click to Order 5086 aluminum plate for marine bulkheads can be used on all types of vessels including merchant vessels, military vessels and personal recreational vessels. They are commonly used as covering materials for ship bulkheads to isolate the environment inside and outside the cargo hold and to provide strength and stability to the cargo hold structure. The main advantages of 5086 O aluminum plates for ship bulkheads include: light weight, high strength, strong corrosion resistance, easy processing and repair, and good impact resistance. In addition, the aluminum plate can also provide good heat insulation and sound insulation performance, increasing the comfort of the cabin. Features of 5086 O Aluminum Plate for Ship Bulkhead Corrosion Resistance: 5086 O aluminum sheet exhibits excellent resistance to seawater and marine environments, making it highly suitable...

Get A Quote

1100 aluminum plate and 3003 aluminum plate for building curtain wall

1100 aluminum plateand 3003 aluminum plate are two kinds of aluminum plate materials commonly used in building curtain walls. They have some similarities and differences.Both 1100 aluminum plate and 3003 aluminum plate are lightweight materials with low density. This makes them ideal for building curtain walls as they do not add excessive load to the structure. At the same time, both have good corrosion resistance, which can effectively resist the erosion of most chemical substances and environments, thereby prolonging the service life of the curtain wall. Both 1100 aluminum plate and 3003 aluminum plate have good processing performance, and can be bent, cut, welded and surface treated. This makes them easier to process and adjust when fabricating and installing curtain walls.Click to Order However, there are some differences between 1100 aluminum plate and 3003 aluminum plate for building curtain wall,the following takes 1100 H24 aluminum plate and 3003 H24 aluminum plate as examples to introduce the differences between these two aluminum plates. Chemical composition of 1100 aluminum plate and 3003 aluminum plate Alloy Si Fe Cu Zn Mn V Al 1100 0.45 0.35 0.05-0.20 0.01 0.035 0.05 Remainder 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 – Remainder   1100 aluminum alloy is a...

Get A Quote